Westell Inc. A9081XXYY-07 ユーザーズマニュアル
030-300479 Rev. A
Draft 1 – 10/17/05
030-300479 Rev. A
48
October 2005
User Guide
UltraLine IIB (Model A90-816030)
This field displays the first IP address that the DHCP server will provide. The DHCP
Start Address must be within the router’s subnet IP and lower than the DHCP End
Address. You may use any number from 0 to 254 in this address.
Start Address must be within the router’s subnet IP and lower than the DHCP End
Address. You may use any number from 0 to 254 in this address.
DHCP End Address
Factory Default = 192.168.1.20
This field displays the last IP address that the DHCP server will provide. The DHCP
End Address must be within the router’s subnet IP and higher than the DHCP Start
Address. You may use any number from 0 to 254 in this address.
This field displays the last IP address that the DHCP server will provide. The DHCP
End Address must be within the router’s subnet IP and higher than the DHCP Start
Address. You may use any number from 0 to 254 in this address.
DHCP Lease Time
Factory Default = 01:00:00:00
Displays the amount of time the provided addresses will be valid, after which the
DHCP client will usually re-submit a request.
Note: DHCP Lease Time is displayed in the format (day:hour:min:sec)*. This value
must be greater than 10 seconds. Seconds must be between 0 and 59, minutes must be
between 0 and 59, and hours must be between 0 and 23.
Displays the amount of time the provided addresses will be valid, after which the
DHCP client will usually re-submit a request.
Note: DHCP Lease Time is displayed in the format (day:hour:min:sec)*. This value
must be greater than 10 seconds. Seconds must be between 0 and 59, minutes must be
between 0 and 59, and hours must be between 0 and 23.
15.5.2 DNS
The following screen will be displayed if you select LAN > DNS from the Configuration menu.
DNS
Domain Name
NOTE: Some ISP’s may require the
name for identification purposes.
NOTE: Some ISP’s may require the
name for identification purposes.
This field allows you to enter a Domain Name for the Gateway.
To add a Domain Name, in the field under User Assigned DNS, type in
your new domain name and click Set.
To add a Domain Name, in the field under User Assigned DNS, type in
your new domain name and click Set.
Static Host Assignment
Host Name
This field allows you to enter a host name for the Gateway.
To add a new host name, in the field under Static Host Assignment, type
in the Host Name and the associated IP address and then click Add.
To delete a Host name, click the Delete button adjacent to the Host Name
To add a new host name, in the field under Static Host Assignment, type
in the Host Name and the associated IP address and then click Add.
To delete a Host name, click the Delete button adjacent to the Host Name