Westell Inc. A9081XXYY-07 ユーザーズマニュアル
030-300479 Rev. A
Draft 1 – 10/17/05
030-300479 Rev. A
68
October 2005
User Guide
UltraLine IIB (Model A90-816030)
15.7.5.4 Configuring WAN VC Protocol for Routed IP mode
If you select Routed IP from the Protocol drop-down menu, the following screen will be displayed. Enter the
appropriate values, and then click Save to save your settings.
VC 1 Routed IP Settings
DHCP Client
Factory Default = Enable
If enabled the router will obtain its IP address, gateway address and DNS server
address automatically from the network. If disabled you must manually enter the
information.
Possible Response:
Select Enable to activate the DHCP client.
Select Disable to deactivate the DHCP client.
If enabled the router will obtain its IP address, gateway address and DNS server
address automatically from the network. If disabled you must manually enter the
information.
Possible Response:
Select Enable to activate the DHCP client.
Select Disable to deactivate the DHCP client.
IP Address
Displays the Gateway’s IP network address.
Subnet
Displays the Gateway’s subnet mask settings.
Gateway
Displays the Gateway’s IP gateway address
DNS Primary
Displays the IP address of primary Domain Name Service (DNS) server your router
is using.
is using.
DNS Secondary
Displays the IP address of secondary DNS server your router is using.
15.7.6 VPN