Westell Inc. A9081XXYY-07 ユーザーズマニュアル

 

 

 

 

 

030-300479 Rev. A 

70 

October 2005 

 User Guide 

 
The following settings will be displayed if you select WAN > Routing Table from the Configuration menu. To add 
a route to the Network Routing Table, enter the appropriate values, and then click Add Route.  
 

 

 

The list of active interfaces on the modem, their IP addresses and subnet masks.  
Address 

The IP interface address of the interface. 

Subnet Mask 

The subnet mask of the interface. 

Name 

The name assigned to the interface. 
Possible names are: 
ppp0 – The WAN interface when the router is in PPPoE or PPPoA mode. 
DSLVC1 – The WAN interface when the router is in DSL Routed IP mode. 
VersaPort – The WAN interface when the router is in uplink Routed IP mode. 
Private LAN – The main Ethernet interface. 
Public LAN – The second Ethernet interface. 
l0 – The local loopback interface. 

Metric 

The numeric value assigned to this interface used to calculate the best route to a 
destination address. 

The list of the network routes. These can be either routes for directly connected networks, or static routes that have 
been entered.