Westell Inc. A9081XXYY-07 ユーザーズマニュアル
030-300479 Rev. A
Draft 1 – 10/17/05
030-300479 Rev. A
72
October 2005
User Guide
UltraLine IIB (Model A90-816030)
15.8 Wireless Configuration
15.8.1 Basic
The following settings will be displayed if you select Wireless > Basic from the Configuration menu. Enter the
appropriate values, and then click Save to save your settings.
Wireless Basic Configuration
Wireless Operation
Factory Default = Enabled
When disabled, no wireless stations will be able to connect to the Gateway.
When disabled, no wireless stations will be able to connect to the Gateway.
Network Name (SSID)
This string (32 characters or less) is the name associated with the AP. To connect to the
AP, the SSID on a Station card must match the SSID on the AP card or be set to “ANY.”
AP, the SSID on a Station card must match the SSID on the AP card or be set to “ANY.”
Channel
Factory Default = 6
The AP transmits and receives data on this channel. The number of channels to choose
from is pre-programmed into the AP card. Station cards do not have to be set to the same
channel as the AP; the Stations scan all channels and look for an AP to connect to.
Possible Response:
1 through 11
The AP transmits and receives data on this channel. The number of channels to choose
from is pre-programmed into the AP card. Station cards do not have to be set to the same
channel as the AP; the Stations scan all channels and look for an AP to connect to.
Possible Response:
1 through 11
Mode
Factory Default = Mixed
This setting allows station to communicate with the Gateway.
Possible Response:
Mixed: Station using any of the 802.11b, 802.11b+, and 802.11g rates can communicate
with the Gateway.
This setting allows station to communicate with the Gateway.
Possible Response:
Mixed: Station using any of the 802.11b, 802.11b+, and 802.11g rates can communicate
with the Gateway.