Laird Controls North America Inc. MKU915A ユーザーズマニュアル

 

Part # 68C-MKU, Edition 01/2007, Version 1.0 

Page 37  

 

Referring to Figure 16 below, remove the battery pack as follows: 

a. 

Lay MKU controller (1) face down. 

b. 

Release two knurled thumbscrews (2) and withdraw cover-plate (3). 

c. 

Withdraw battery pack (4) from battery compartment (5). 

Referring to Figure 16 above, replace the battery pack as follows: 

a. 

Position battery pack (4) with the four contact strips facing down and forwards. 
Install battery pack (4) by pushing fully home inside the battery compartment (5). 

b. 

Install cover-plate (3) and secure by evenly hand tightening two knurled 
thumbscrews (2).  Do not overtighten - a snug fit is all that is necessary.