Uniden America Corporation UB359 ユーザーズマニュアル
© 2009 Uniden America Corp.
EDACS Trunked Systems
. Below is an example of an EDACS trunked system from
:
of a basic EDACS Wide system. (
for a
legend of the diagram.)
Programming an EDACS System
To program an EDACS system, you'll need to program the required elements in following order
(
):
Create a system
1. Go to the
menu and choose New System.
2. The scanner will prompt you for the System Type. Select EDCS.
3. The scanner will prompt you for the sub-type. Select Wide/Narrow.
4. When the scanner prompts you confirm, tap YES.
5. The scanner creates the system with a default name. Select
if you want to
change it.
6. If you need to change any of the system properties, you can do that now. Unless a
property is Required, you can operate the system without changing the default settings.
System properties
(All of these options can be found under the
menu. If necessary, the sub-menu
and the exact option name are listed beside each property.)
Required
None
Recommended
Name (
)
Number tag (
EDACS Wide System
search
contents
Go