Motorola Solutions Inc. 89FT7052 ユーザーズマニュアル

Motorola reserves the right to make changes to any product to improve reliability, 
function, or design.

Motorola does not assume any product liability arising out of, or in connection with, the 
application or use of any product, circuit, or application described herein.

No license is granted, either expressly or by implication, estoppel, or otherwise under 
any patent right or patent, covering or relating to any combination, system, apparatus, 

machine,  material, method, or process in which Motorola products might be used. An 

implied license exists only for equipment, circuits, and subsystems contained in 
Motorola products.

1

2

3

Motorola Solutions, Inc.
1301 E. Algonquin Rd.
Schaumburg, IL 60196-1078, U.S.A.
http://www.motorolasolutions.com

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are 
trademarks or registered trademarks of Motorola Trademark Holdings, LLC 
and are used under license. All other trademarks are the property of their 
respective owners. 

© 2011 Motorola Solutions, Inc. All Rights Reserved.

@6802987C72@

BEFORE USING THIS ENTERPRISE WiFi PHONE (EWP), READ THIS BOOKLET 
WHICH CONTAINS IMPORTANT OPERATING INSTRUCTIONS FOR SAFE USAGE 
AND RF ENERGY AWARENESS AND CONTROL INFORMATION AND 
OPERATIONAL INSTRUCTIONS FOR COMPLIANCE WITH RF ENERGY 
EXPOSURE LIMITS IN APPLICABLE NATIONAL AND INTERNATIONAL 
STANDARDS. ALSO READ THE OPERATIONAL INSTRUCTIONS FOR SAFE 
USAGE. 

This device is approved under Motorola Solutions, Inc.
This guide applies to the following Model Numbers: EWP2200 and EWP3200.

All Motorola devices are designed to be compliant with rules and regulations in locations 
they are sold and will be labeled as required. 

Local language translations are available at the following website:

Any changes or modifications to Motorola equipment, not expressly approved by 
Motorola, could void the user's authority to operate the equipment.
Declared maximum operating temperature: 50°C (122°F).

This is an approved Bluetooth product. For more information or to view the End Product 
Listing, please visit:

.

Regulatory markings, subject to certification, are applied to the device signifying the 
radio(s) are approved for use in the following countries: United States, Canada, S. 
Korea, Australia, and Europe

1

.

Please refer to the Motorola Declaration of Conformity (DoC) for details of other country 
markings. This is available at:

.

Note 1: For 2.4GHz or 5GHz Products: Europe includes Austria, Belgium, Bulgaria, 
Czech Republic, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, 
Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, 
Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, 
Sweden, Switzerland and the United Kingdom.

This device incorporates the International Roaming feature (IEEE802.11d) which will 
ensure the product operates on the correct channels for the particular country of use.

The use in the UNII (Unlicensed National Information Infrastructure) band 1 5150-5250 
MHz band is restricted to Indoor Use Only; any other use will make the operation of this 
device illegal.

The available channels for 802.11 b/g operation in the US are Channels 1 to 11. The 
range of channels is limited by firmware.

•

Reduce or eliminate repetitive motion

•

Maintain a neutral postures

•

Reduce or eliminate excessive force

•

Keep objects that are used frequently within easy reach

•

Perform tasks at correct heights

•

Reduce or eliminate vibration

•

Reduce or eliminate direct pressure

•

Provide adjustable workstations

•

Provide adequate clearance

•

Provide a suitable working environment

•

Improve work procedures

This Enterprise WiFi Phone is intended for use in general population/uncontrolled 
environment.
This Enterprise WiFi Phone uses electromagnetic energy in the radio frequency (RF) 
spectrum to provide communications between two or more users over a distance. It 
uses radio frequency (RF) energy or radio waves to send and receive calls. RF energy 
is one form of electromagnetic energy. Other forms include, but are not limited to, 
sunlight and x-rays. RF energy, however, should not be confused with these other forms 
of electromagnetic energy, which when used improperly, can cause biological damage. 
Very high levels of x-rays, for example, can damage tissues and genetic material. 
Experts in science, engineering, medicine, health, and industry work with organizations 
to develop standards for safe exposure to RF energy. These standards provide 
recommended levels of RF exposure for both workers and the general public. These 
recommended RF exposure levels include substantial margins of protection.
All Motorola radio products are designed, manufactured, and tested to ensure they meet 
government-established RF exposure levels. In addition, manufacturers also 
recommend specific operating instructions to users of products with radios.
These instructions are important because they inform users about RF energy exposure 
and provide simple procedures on how to control it.
Please refer to the following websites for more information on what RF energy exposure 
is and how to control your exposure to assure compliance with established RF exposure 
limits:
http://www.fcc.gov/oet/rfsafety/rf-faqs.html
http://www.osha.gov/SLTC/radiofrequencyradiation/ index.html

Your Motorola Enterprise WiFi Phone is designed and tested to comply with a number of 
national and International standards and guidelines (listed below) for human exposure 
to radio frequency electromagnetic energy. 
This Enterprise WiFi Phone complies with the IEEE (FCC) and ICNIRP exposure limits 
for general population/uncontrolled environments. 
Your Motorola Enterprise WiFi Phone complies with the following RF energy exposure 
standards and guidelines:

•

United States Federal Communications Commission,

•

Code of Federal Regulations; 47 CFR part 2 sub-part J

•

American National Standards Institute (ANSI) / Institute of Electrical and Electronic 
Engineers (IEEE) C95. 1-1992

•

Institute of Electrical and Electronic Engineers (IEEE)

•

C95.1-1999 Edition

•

Institute of Electrical and Electronic Engineers (IEEE)

•

C95.1-2005 Edition

•

International Commission on Non- Ionizing Radiation Protection (ICNIRP) 1998

•

Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radio 
frequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 
1999

•

Australian Communications Authority Radio communications (Electromagnetic 
Radiation – Human Exposure) Standard, 2003

•

 ANATEL ANNEX to Resolution No. 303 of July 2, 2002 
"Regulation of limitation of exposure to electrical, magnetic and electromagnetic 
fields in the radio frequency range between 9 KHz and 300 GHz" and "Attachment to 
resolution # 303 from July 2, 2002".

The device complies with Internationally recognized standards covering human 
exposure to electromagnetic fields from radio devices. For information on "International" 
human exposure to electromagnetic fields refer to the Motorola Declaration of 
Conformity (DoC) at:

Only operate the device in accordance with the instructions supplied.

To control your exposure and ensure compliance with the general population/
uncontrolled environment exposure limits, always adhere to the following procedures:

•

When worn on the body, always place the Enterprise WiFi Phone in a Motorola-
approved clip, holder, holster, case, or body harness for this product. Using 
approved body-worn accessories is important because the use of non-Motorola-
approved accessories may result in exposure levels, which exceed the IEEE/
ICNIRP general population/uncontrolled environment RF exposure limits.

When placing or receiving a phone call, hold the product as you would a wireless 
telephone, and talk directly into the microphone.

This device was tested for typical body-worn operation. Use only Motorola tested and 
approved belt-clips, holsters, and similar accessories to ensure EU Compliance.

Use only Motorola tested and approved belt-clips, holsters, and similar accessories to 
ensure FCC Compliance. The use of third-party belt-clips, holsters, and similar 
accessories may not comply with FCC RF exposure compliance requirements, and 
should be avoided. The FCC has granted an Equipment Authorization for these model 
phones with all reported SAR levels evaluated as in compliance with the FCC RF 
emission guidelines. SAR information on these model phones is on file with the FCC 
and can be found under the Display Grant section of:

To comply with FCC RF exposure compliance requirement, the antenna used for this 
transmitter must not be co-located or operating in conjunction with any other transmitter/
antenna except those already approved in this filling.

This device was tested for typical body-worn operation. Use only Motorola tested and 
approved belt-clips, holsters, and similar accessories to ensure FCC Compliance. The 
use of third-party belt-clips, holsters, and similar accessories may not comply with FCC 
RF exposure compliance requirements, and should be avoided.

Use only Motorola-approved supplied or replacement, batteries, and accessories. Use 
of non–Motorola batteries and accessories may exceed IEEE/ICNIRP RF exposure 
guidelines.
For a list of Motorola-approved batteries and other accessories please see your dealer 
or local Motorola contact. Your nearest dealer can be found at the following web site:

For additional information on exposure requirements or other training information, visit:

.

Please observe all warning notices with regard to the usage of wireless devices.

Nearly every electronic device is susceptible to electromagnetic interference 

(EMI) if inadequately shielded, designed or otherwise configured for electromagnetic 
compatibility.

To avoid electromagnetic interference and/or compatibility conflicts, turn off your 
Enterprise WiFi Phone in any facility where posted notices instruct you to do so. 
Hospitals or health care facilities may be using equipment that is sensitive to external 
RF energy.

When instructed to do so, turn off your Enterprise WiFi Phone when on board an 
aircraft. Any use of an Enterprise WiFi Phone must be in accordance with applicable 
regulations per airline crew instructions.
If your device offers a 'flight mode' or similar feature, consult airline staff as to its use in 
flight.

Wireless devices transmit radio frequency energy and may affect medical electrical 
equipment.
Wireless devices should be switched off wherever you are requested to do so in 
hospitals, clinics or healthcare facilities. These requests are designed to prevent 
possible interference with sensitive medical equipment.

The Advanced Medical Technology Association (AdvaMed) recommends that a 
minimum separation of 15 cms (6 inches) be maintained between an Enterprise WiFi 
Phone with wireless radios and a pacemaker. These recommendations are consistent 
with those of the U.S. Food and Drug Administration.
Persons with pacemakers should:

•

ALWAYS keep the Enterprise WiFi Phone more than 15 cms from their pacemaker 
when the Enterprise WiFi Phone is turned ON.

•

Not carry the Enterprise WiFi Phone in the breast pocket.

•

Use the ear opposite the pacemaker to minimize the potential for interference.

•

Turn the Enterprise WiFi Phone OFF immediately if you have any reason to suspect 
that interference is taking place.

Use only Motorola approved and UL Listed accessories, battery 
packs and battery chargers.

Do NOT attempt to charge damp/wet devices or batteries. All 
components must be dry before connecting to an external power 
source. 

RISK OF EXPLOSION IF BATTERY IS REPLACED WITH 
INCORRECT TYPE. DISPOSE OF USED BATTERIES 
ACCORDING TO THE BATTERY MANUFACTURER’S 
INSTRUCTIONS.

  Operation of the device without regulatory approval is illegal.

The device for the band 5150-5250 MHz is only for indoor usage 
to reduce potential for harmful interference to co-Channel mobile 
satellite systems. High power radars are allocated as primary 
users (meaning they have priority) of 5250-5350 MHz and 5650-
5850 MHz and these radars could cause interference and/or 
damage to LE-LAN devices.

Le dispositive fonctionnant dans la bande 5150-5250 MHz 
est réservé uniquement pour une utilisation à l'intérieur afin 
de réduire les risques de brouillage préjudiciable aux 
systèmes de satellites mobiles utilisant les m

ê

mes canaux. 

Les utilisateurs de radars de haute puissance sont désignés 
utilisateurs principaux (c.-à-d., qu'ils ont la priorité) pour les 
bands 5250-5350 MHz et 5650-5850 MHz et que ces 
radars pourraient causer du brouillage et/ou des dommages 
aux dispositifs LAN-EL.

  In order to avoid or minimize the potential risk of ergonomic injury 

follow the recommendations below. Consult with your local Health & 
Safety Manager to ensure that you are adhering to your company’s 
safety programs to prevent employee injury.