VeriFone 1619-20XPL ユーザーズマニュアル
CONFIDENTIAL
Version A
Page 18 of 37
MasterCard® PayPass™ Contactless Transit Pilots
Installation Guide
3.4
Installation Process
The Installation process comprises six main parts, as outlined in the following sub-sections.
3.4.1
Install the Antenna
1.
Ensure that the area where the antenna is to be positioned is cleaned.
2.
Drill a hole on the bus roof – position to be agreed between installer and transit
agency, with a view to ensuring best placement relative to internal situation of
solution. Note that the antenna cables are 15 feet
agency, with a view to ensuring best placement relative to internal situation of
solution. Note that the antenna cables are 15 feet
3.
Ensure that the antenna fixing instructions – supplied with the antenna - are followed
precisely, taking particular note of how the cleaning and adhesive agents are to be
used. Failure to do so will result in the antenna becoming detached.
precisely, taking particular note of how the cleaning and adhesive agents are to be
used. Failure to do so will result in the antenna becoming detached.
4.
Feed the antenna cable through the hole.
5.
Run the antenna cable to the where the Secura will be housed inside the bus
6.
Apply the epoxy glue around the hole
7.
Affix the antenna to the bus roof securely?