VeriFone 1619-20XPL ユーザーズマニュアル
CONFIDENTIAL
Version A
Page 22 of 37
MasterCard® PayPass™ Contactless Transit Pilots
Installation Guide
3.4.3
Install the Secura Control Unit
1.
Attach the support bracket [8] to the agreed position on the bus, as shown:
2.
Cut about 15cm (6in) of flexible tubing
3.
Feed the antenna cables through the flexible tubing
4.
Feed the power cables through the flexible tubing
5.
Feed the cables into the support bracket as shown. The 12-way connector cable shall
be fed through the left aperture. The antenna cable, power cable and GPS cable shall
be fed through the right hand aperture as shown. Note that that antenna cable
should be fed through before the other two, as the connector is quite large relative to
the aperture.
be fed through the left aperture. The antenna cable, power cable and GPS cable shall
be fed through the right hand aperture as shown. Note that that antenna cable
should be fed through before the other two, as the connector is quite large relative to
the aperture.