VeriFone E265G ユーザーズマニュアル

 

E

265G I

NSTALLATION

 G

UIDE

V

E R

I

F

O

N E

O

N F

I D

E N

T I

A

L

R

EVIS

IO

N

 A

.6

 

The e265G battery must initially receive a full charge to ensure proper operation.

When the e265G device display screen does not show correct or clearly readable 
information:

The battery pack may not be connected properly. Remove and reinstall the 

battery pack.

Check device power connection.

Remove and reapply power to the device.

If the problem persists, contact your local Verifone service provider.

If the keypad does not respond properly:

Check the device display. If it displays the wrong character or nothing at all 

when you press a key, follow the steps outlined in 

If pressing a function key does not perform the expected action, refer to the 

user documentation for that application to ensure you are entering data 
correctly.

If the problem persists, contact your local Verifone representative.

Allow the e265G device to remain connected to the power pack for eight 

hours to ensure the battery receives a full charge.

Li-ion batteries are not affected by shallow charging. Furthermore, when the 

device has no external power source or battery the coin cell battery provides 
power to the security circuit.

Uninstalling the battery and unplugging the device power pack reduce the life 

of the coin cell battery, which does not recharge and must be replaced if 
drained.

Conserve battery power by turning the e265G device off when not in use. 

Keep the Li-ion battery inserted in the device and power up the device 
periodically to check the battery charge. Do not let the battery charge fall 
below 10% for extended periods of time as this may permanently diminish the 
battery capacity. Recharge the battery by attaching USB end of the power 
pack to the device and plugging the other end of the power pack into a wall 
outlet.

The e265G device automatically shuts off when the battery reaches the 

critically low charge state. If this occurs, the battery must recharge a 
minimum of 1/2 hour before it can power the device. It may take several 
recharge attempts to reset the safety circuit when charging a battery that has 
been discharged below this critical state.