Lifeline Systems Inc. 7100MHB ユーザーズマニュアル
xx
Questions? Call 1-800-635-6156
Supervision Failure – 7150 MHB
Alarm Event
Description
Description
End Devices periodically check-in to the Communicator.
If the Communicator has not received a check-in from the
End Devices for a week, then a silent alarm is sent to the
Response Center
If the Communicator has not received a check-in from the
End Devices for a week, then a silent alarm is sent to the
Response Center
[What happens here?]
Priority
N/A
Device Action
Operates normally
Alarm Event
Reported/Displayed
Locally?
Reported/Displayed
Locally?
No visual or audible alarm is generated by the devices.
Alarm Event
Reported
to Lifeline?
Reported
to Lifeline?
Yes. A silent Maintenance Signal is sent to the Response
Center by the Home Communicator. Upon receiving the
Maintenance Signal, the Response Center prioritizes the
response and contacts the Subscriber to verify the status of
their equipment.
Center by the Home Communicator. Upon receiving the
Maintenance Signal, the Response Center prioritizes the
response and contacts the Subscriber to verify the status of
their equipment.
[What happens here?]
Priority of Device Error Alarms
Fault Condition
Audio Message
Delay in Determining Alarms
Reporting high priority help alarms from the GoSafe Lite Pendant to the Lifeline
Response Center is typically done in less than a minute when generated by a button
press, depending on the status of the cellular network and signal strength available
clarify time to voice on line.
Response Center is typically done in less than a minute when generated by a button
press, depending on the status of the cellular network and signal strength available
clarify time to voice on line.
The GoSafe Lite Mobile Pendant provides an added layer of protection by being
able to detect falls under certain conditions. This takes approximately 30 seconds to
determine that an activity that resembles a fall has occurred, and that the user has not
recovered from the fall on their own. If a fall is detected by the 7150MHB, the signal is
sent directly to the Response Center via the AT&T wireless nework, if available.
able to detect falls under certain conditions. This takes approximately 30 seconds to
determine that an activity that resembles a fall has occurred, and that the user has not
recovered from the fall on their own. If a fall is detected by the 7150MHB, the signal is
sent directly to the Response Center via the AT&T wireless nework, if available.
dra
ft
Confidential Draft for Agency Submission Only.
Not for Posting on any Public-Facing Website
Not for dissemination to the public without the express written consent of Philips.