LinkCom Manufacturing Co. Ltd. LCBTMD02 ユーザーズマニュアル
2.4 : Bluetooth Block Diagram
2.5 : Antenna design
When the customer selects the internal on-board antenna, antenna design should comply with the following rules
and modules of the proposed location:
② :The antenna must be away from the metal or high component of at least 10 mm
②:The antenna can not be any piece of enclosure protection All shells, including
and modules of the proposed location:
② :The antenna must be away from the metal or high component of at least 10 mm
②:The antenna can not be any piece of enclosure protection All shells, including
plastics, should be kept away from the antenna area at least 10 mm
2.6 : PCB design description
The power to recommend the use of LDO for DC 3.3V , provide the driving current of at least
30mA, the module of power capacitor placed a 10uF proposalIn the PCB layout, the BLE module is placed should
be kept away from the magnetic field source such as transformers and coils
30mA, the module of power capacitor placed a 10uF proposalIn the PCB layout, the BLE module is placed should
be kept away from the magnetic field source such as transformers and coils
2.7 : Rest
When the module network, to back network, no mobile phone APP on the network when the network back, the
need for a hardware reset reset method: power up and down in the form of (three short and two long), first power
on 1-3S, and then, repeat 3 times, then 2 long time the 5-10S on the electrical operation can be reset。
need for a hardware reset reset method: power up and down in the form of (three short and two long), first power
on 1-3S, and then, repeat 3 times, then 2 long time the 5-10S on the electrical operation can be reset。