Mobius Mobility LLC 22007 ユーザーズマニュアル
TRANSFER IN AND OUT
OF THE IBOT
OF THE IBOT
Transferring into and out of your ibot requires a
good sense of balance. Always have an assistant
or healthcare professional present while learning
to properly transfer yourself.
good sense of balance. Always have an assistant
or healthcare professional present while learning
to properly transfer yourself.
To reduce the possibility of a fall, you should
follow these steps before attempting a transfer:
follow these steps before attempting a transfer:
1. Verify you are in
Standard Mode and Power
OFF.
2. Ensure your ibot is not in freewheel mode.
3. Make sure both armrests are flipped up or
removed.
4. Be careful of the footrests. If you can,
remove or swing them out of the way. This
will help to keep your feet from getting
caught during the transfer.
will help to keep your feet from getting
caught during the transfer.
5. Move your ibot as close as you can to the
seat you are transferring to. If possible, use
a transfer board.
a transfer board.
WARNING
Always transfer into or out of the ibot in Standard Mode with
the device powered OFF.
the device powered OFF.
If the casters are not on the ground, or if the power is ON, the
device could become unstable during the transfer. Personal
injury could result.
device could become unstable during the transfer. Personal
injury could result.
WARNING
Do not use the foot plates or arm rests as supports when
getting into or out of the device. The foot plates and armrests
are not intended to support heavy loads.
getting into or out of the device. The foot plates and armrests
are not intended to support heavy loads.
An unnecessarily high load could cause them to give way,
which could result in personal injury.
which could result in personal injury.
H
a
n
d
lin
g
122
DKPX-09006-001-Rev. 1.7