Mobius Mobility LLC 22007 ユーザーズマニュアル
The height of the track can be adjusted to
provide a range of placement of the lateral
support. This is accomplished by using a 5 mm
hex wrench. Remove the 2 mounting bolts, adjust
the track, align holes, then reinsert the bolts and
tighten.
provide a range of placement of the lateral
support. This is accomplished by using a 5 mm
hex wrench. Remove the 2 mounting bolts, adjust
the track, align holes, then reinsert the bolts and
tighten.
The track mounting system of the lateral support
will slide into the track mount, which provides
upward and downward adjustment. When the
proper position is achieved, tightening the two
bolts will secure the lateral support at that
position.
will slide into the track mount, which provides
upward and downward adjustment. When the
proper position is achieved, tightening the two
bolts will secure the lateral support at that
position.
Adjustment of the pad inward and outward is
achieved by loosening the bolts at each link
point. When the desired position is achieved,
tightening the bolts will secure that position.
achieved by loosening the bolts at each link
point. When the desired position is achieved,
tightening the bolts will secure that position.
M
a
in
te
n
a
n
c
e
150
DKPX-09006-001-Rev. 1.7