Mobius Mobility LLC 22007 ユーザーズマニュアル
M
a
in
te
n
a
n
c
e
SWING AWAY FEATURE
The lateral pad can be swung out of the way
without requiring repositioning the pad, by
pushing down on the release button and
swinging the pad away. It is returned by pushing
the pad back in so the button will pop up.
without requiring repositioning the pad, by
pushing down on the release button and
swinging the pad away. It is returned by pushing
the pad back in so the button will pop up.
Note: It is recommended that you first swing
away the user controller, and then raise the
armrest before swinging away the lateral pad.
This allows room for the armrest to be stowed in
the rear-most position needed for a lateral
transfer.
away the user controller, and then raise the
armrest before swinging away the lateral pad.
This allows room for the armrest to be stowed in
the rear-most position needed for a lateral
transfer.
CONTOURED HEADREST
If your device is equipped with the optional
contoured headrest:
contoured headrest:
INSTALLING AND ADJUSTING
The
Contoured Headrest will mount into the
same receiver as the Standard Headrest. First
remove the Standard Headrest, press the release
latch, and pull out to remove from receiver.
remove the Standard Headrest, press the release
latch, and pull out to remove from receiver.
Install by sliding the mounting bracket of the
Optional Headrest into the two receiver holes
while pressing the release latch on the outside of
the Left Receiver.
Optional Headrest into the two receiver holes
while pressing the release latch on the outside of
the Left Receiver.
DKPX-09006-001-Rev. 1.7
151