ZHUHAI EUCCOI DIGITAL TECHNOLOGY CO. LTD. A56-220 ユーザーズマニュアル
Bluetooth&2.4G
4
General Settings
Scan barcode to setup scanner
Restore defaults
(restore factory settings)
■
How to use the scanner (2.4G)?
1, Press the button, the buzzer rang “Di-di-di” , the
status light
is on, the
scanner starts.
2, Plug the receiver to your computer, the blue light is on, the receiver
starts to work.
3, Please match the receiver and the scanner within 30 seconds!
4, Open a text, put the cursor in, Scan any barcode to see if the barcode
4, Open a text, put the cursor in, Scan any barcode to see if the barcode
can be uploaded.
Match
(match the scanner and the receiver)
■
Matching Operation
Plug the receiver to your computer,when it start to work ,Match the
scanner and the receiver by scan the “Match” Barcode.
(1) Matching successfully, the buzzer rang “ Di-da-di”, “DI-di-di”.
(2) Matching failed, the buzzer rang “ Di---en”.
(2) Matching failed, the buzzer rang “ Di---en”.
■
Network Mode :One to one ,More to one
►One to one
►One to one
—
one scanner to one receiver
1, plug the receiver to your computer
2, scan the “Match” bar code to Match the receiver
►More to one —several scanner to one receiver
If you have 2 scanners: scanner A, scanner B,
1, Plug the receiver to your computer
2, Match for the scanner A: A scan the “Match” Barcode.
3,Unplug the receiver and Plug the receiver again.
3,Unplug the receiver and Plug the receiver again.
4, Match for the scanner B: B scan the “Match” Barcode.
After that ,2 scanners can transmit the data to the receiver.
After that ,2 scanners can transmit the data to the receiver.