ZHUHAI EUCCOI DIGITAL TECHNOLOGY CO. LTD. A56-220 ユーザーズマニュアル
Bluetooth&2.4G
6
Power and Standby Setup
Battery Reserve（show
battery level
）
Set the time for automatic shutdown
50 seconds shutdown
2 minutes shutdown-Default
5 minutes shutdown
30 minutes shutdown
Battery level indication
1. The scanner starts, when the buzzer rang “Di-di-di” and the status light is on
with no red light flashing, it indicates that the battery is sufficient
2. The scanner starts, when the buzzer rang “Di-di-di” and the status light is on
with the red light flashes three times, it indicates that the battery less than 30%,
please charge the scanner as soon as possible
3. The scanner starts, when the buzzer doesn’t make a sound and the status
light is off with the red light flashes three times. It indicates that the battery less
than 20%. The scanner enters the low battery protection mode. Please charge
the scanner at least for 30 minutes before using
4. Press the button, the scanner does not respond. Please charge the scanner
at least for 30 minutes. If the scanner still cannot start, this indicates that the
battery is broken and needs to be replaced.
with no red light flashing, it indicates that the battery is sufficient
2. The scanner starts, when the buzzer rang “Di-di-di” and the status light is on
with the red light flashes three times, it indicates that the battery less than 30%,
please charge the scanner as soon as possible
3. The scanner starts, when the buzzer doesn’t make a sound and the status
light is off with the red light flashes three times. It indicates that the battery less
than 20%. The scanner enters the low battery protection mode. Please charge
the scanner at least for 30 minutes before using
4. Press the button, the scanner does not respond. Please charge the scanner
at least for 30 minutes. If the scanner still cannot start, this indicates that the
battery is broken and needs to be replaced.
LED tips during charging
Plugged the USB cable into the USB port of computer
1. Charging mode: the status light is on with the red light flashing
2. Charging completed: the status light is on and the red light goes out
1. Charging mode: the status light is on with the red light flashing
2. Charging completed: the status light is on and the red light goes out
3. Micro-current charging: the status light off and the red light flashing (Note:
This is battery protection phase, please do not use it in this condition)