Hubei Kailisi Electronics Co. Ltd. KLS-203 ユーザーズマニュアル

 

RUNVA wireless remote works lets you operate your winch from up to 75 ft without 

cables or switches. Just press the remote transmitter and you're ready to operate your winch 

Start, stop, in or out. 

◆  Remote range up to 75 ft. 
◆  Transmitter equipped with long life. 
◆  Battery and power saver circuit. 
◆  Transmitter & receiver. 
◆  Visual indicator light shows remote operation. 
◆  Additional transmitters available tooperate receiver. 
◆  Installs in minutes. 

◆ 

Transmitter replacement batteryreadily available.

 

WARNING: The Wireless Remote is designed for use on front mount self-recovery winches 

only. The remote is not designed for and should not be used on winches or hoists in 

industrial applications (commercial car haulers/carriers, wreckers, cranes, etc.) or for any 

other remote controlled applications. 

RWRC①－②－③－④－⑤ 
①：Signed as 01, 02. ”01”: Code learning Type; “02”: Code Fixed. 
②：Using Range admitted. Signed as E, C.”E” : European Using Style; 

”C” Common style, this letter is always leave out;   

③：Power Voltage, Signed as 12VDC or 24VDC. 

④：Connector Style, using solely out of the winches control box. Signed as 03, 04. “03” : 

three cores connector;   

“04” : four cores of connector. 

⑤: mount type, Signed as 05. 

“05” :small remote can fix in the winches control box. 

1. one 

transmitter. 

2.  one receiver with three or four cores of line with connector. 

There are two kinds of different connect way for the reason of different kinds winches’ 

solenoid female connector. You can choice a suitable type of wireless remote  control as 

RWRC－03 or RWRC－04. showing as the following connection drawing. 

RWRC－03: While you insert the receiver plug to the winches’ solenoid female connector, 

you shold connect the earth line to the battery negative. Be sure of the earth  line connect 

exactly, then you can operate your winch by press the button on the transmitter. 

RWRC－04: While you are ready to operate a winch, just connect the four cores of the 

recever to the winches’ solenoid female connector. And then you can operate your winch by 

press the button on the transmitter. NOTE: Make sure one of the four pole receptacle is 

connected to earth. 

 

“03”,”04”connection drawing: 

To Battery 

Earth Line

"03" Type

"04" Type

Receiver

Transmitter

female connector

solenoid control box

antenna