Hubei Kailisi Electronics Co. Ltd. KLS-203 ユーザーズマニュアル

There is a small remote can be fixed in the winches control box: 

 RWRC－05: While your fixing according to the drawings showing as follows: 

 

 

We suggest operate your winch as follows: 

1.  Disengage the clutch of your winch. 

2.  Pull out the winch wire rope about 1.5 meters. 

3.  Reengage the clutch of your winch. 

4.  Insert the plug of remote control recever into the winches’ solenoid control box  

female connector, if your wireless remote control is  －03 type, you should properly 

connect the black earth line to the battery negative. 

5.  Put your receiver at a certain place. 

6.  Keep the antenna of receiver out and straight. 

7.  Pull out the antenna of transmitter, and move down the cover of your transmitter, 

bare out the control button. 

8.  Press the button, you can operate your winch start, stop, in and out. 

SYMPTOM POSSIBLE 

CAUSE 

SUGGESTED 

ACTION 

Motor turns,   

but Winch   

does not work, 

Defective winch. 

Check the winch Operating instructions.

Receiver Loose connections 

to the winch. 

Reinsert all the way.   

False Earth line cinnection 

Ensure the earth connections. 

Motor does not 

turn, but you 

can hear “Click” 

sound in the 

receiver  

Defective winch. 

Check the winch Operating instructions.

Receiver Loose connections 

to the winch. 

Reinsert all the way.   

Motor runs in 

one direction 

only 

Defective winch. 

Check the winch Operating instructions.

No actions   

Receiver and transmitterdoes 

not matching. 

“01”Type : Code learn. 

“02”Type : return to the manufacture to 

rematch.