WINLITE INTERNATIONAL LTD DIN1001 ユーザーズマニュアル
User Guide (D-IN Bluetooth Speaker)
Technical Spec.:
Input Voltage: 5-5.5V,
Built-in Lithium battery: 3.7V, 1000MA
Power: 3W*2
How to Use
Six Buttons: PLAY PREV NEXT VOL- VOL+ MODE
4 working modes, the sequence of playing mode by default is listed as below:
BLUETOOTH
AUX
USB/SDcard
( switch between these four modes with “M” button )
)
)
)
** Charging the Battery
1.
To charge the D-IN BT Speaker, connect the DC plug on the included USB
Power Cable to the Power input located on the back of the speaker.
2.Connect the USB end to a powered USB port.
CAUTIION
Please be noted that the input voltage can’t be over 5.5V or below 5V.
The speaker can’t be charged if the input voltage is too low; the speaker will be
damaged if the input voltage is too high.