Panasonic Corporation of North America RP-BTS35 ユーザーズマニュアル
English
Please check and identify the supplied accessories.
Only for U.S.A.:
To order accessories, refer to “Limited Warranty” on the
rear page.
Only for Canada:
To order accessories, contact the dealer from whom you
have made your purchase.
∏ 1 x USB charging cord
∏ 1 x Earpieces set (L, S)
Only for U.S.A.:
To order accessories, refer to “Limited Warranty” on the
rear page.
Only for Canada:
To order accessories, contact the dealer from whom you
have made your purchase.
∏ 1 x USB charging cord
∏ 1 x Earpieces set (L, S)
• M-size earpieces are attached at the time of purchase.
Français
Please check and identify the supplied accessories.
Pour commander des accessoires, contacter le revendeur
chez qui vous avec réalisé votre achat.
∏ 1 x USB charging cord
∏ 1 x Earpieces set (L, S)
Pour commander des accessoires, contacter le revendeur
chez qui vous avec réalisé votre achat.
∏ 1 x USB charging cord
∏ 1 x Earpieces set (L, S)
• M-size earpieces are attached at the time of purchase.
Español
Please check and identify the supplied accessories.
∏ 1 x USB charging cord
∏ 1 x Earpieces set (L, S)
∏ 1 x USB charging cord
∏ 1 x Earpieces set (L, S)
• M-size earpieces are attached at the time of purchase.
Basic Owner’s Manual
Manuel d’utilisation Fonctions de base
Instrucciones básicas de funcionamiento
Digital Wireless Stereo Earphones
Écouteurs numériques stéréo sans fil
Auriculares estéreo inalámbricos digitales
RP-BTS35
Thank you for purchasing this product.
Please read these instructions carefully before using this product, and save this manual for future use.
Please read these instructions carefully before using this product, and save this manual for future use.
Nous vous remercions d’avoir arrêté votre choix sur cet appareil.
Il est recommandé de lire attentivement ce manuel avant d’utiliser l’appareil et de le conserver pour
consultation ultérieure.
Il est recommandé de lire attentivement ce manuel avant d’utiliser l’appareil et de le conserver pour
consultation ultérieure.
Le agradecemos haber adquirido este producto.
Lea cuidadosamente estas instrucciones antes de usar este producto, y guarde este manual para
usarlo en el futuro.
Lea cuidadosamente estas instrucciones antes de usar este producto, y guarde este manual para
usarlo en el futuro.
PP
Model No.
N° de modèle
Two Riverfront Plaza, Newark, NJ 07102-5490
Panasonic Corporation of North America
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
www.panasonic.com
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
www.panasonic.com
http://shop.panasonic.com
Panasonic Corporation 2017
Printed in China/Imprimé en Chine/Impreso en China
Printed in China/Imprimé en Chine/Impreso en China
TQBM0175
F0817HA0
Register online at http://shop.panasonic.com/support
(U.S. customers only)
(U.S. customers only)
If you have any questions, visit:
In the U.S.A.:
http://shop.panasonic.com/support
In Canada:
www.panasonic.ca/english/support
Pour toute question, visitez :
www.panasonic.ca/french/support
In the U.S.A.:
http://shop.panasonic.com/support
In Canada:
www.panasonic.ca/english/support
Pour toute question, visitez :
www.panasonic.ca/french/support
English
More detailed operating instructions
are available in “Operating
Instructions (PDF format)”.
To read it, download it from the
website.
http://panasonic.jp/support/global/cs/
accessories/oi/rp_bts35/
• Click the desired language.
More detailed operating instructions
are available in “Operating
Instructions (PDF format)”.
To read it, download it from the
website.
http://panasonic.jp/support/global/cs/
accessories/oi/rp_bts35/
• Click the desired language.
Français
More detailed operating instructions are available in
“Operating Instructions (PDF format)”.
To read it, download it from the website.
http://panasonic.jp/support/global/cs/accessories/oi/rp_bts35/
• Click the desired language.
More detailed operating instructions are available in
“Operating Instructions (PDF format)”.
To read it, download it from the website.
http://panasonic.jp/support/global/cs/accessories/oi/rp_bts35/
• Click the desired language.
Español
More detailed operating instructions are available in
“Operating Instructions (PDF format)”.
To read it, download it from the website.
http://panasonic.jp/support/global/cs/accessories/oi/rp_bts35/
• Click the desired language.
More detailed operating instructions are available in
“Operating Instructions (PDF format)”.
To read it, download it from the website.
http://panasonic.jp/support/global/cs/accessories/oi/rp_bts35/
• Click the desired language.
Accessories
Caution: Use only the supplied USB charging cord when
connecting to a computer.
connecting to a computer.
Accessories
Caution: Use only the supplied USB charging cord when
connecting to a computer.
connecting to a computer.
Accessories
Caution: Use only the supplied USB charging cord when
connecting to a computer.
connecting to a computer.
English
∫ About water resistance
∫ About water resistance
IPX4 equivalent
Protected against splashing water.
(Securely close the USB lid.)
Protected against splashing water.
(Securely close the USB lid.)
Français
∫ About water resistance
∫ About water resistance
IPX4 equivalent
Protected against splashing water.
(Securely close the USB lid.)
Protected against splashing water.
(Securely close the USB lid.)
Español
∫ About water resistance
∫ About water resistance
IPX4 equivalent
Protected against splashing water.
(Securely close the USB lid.)
Protected against splashing water.
(Securely close the USB lid.)
∫ Unit
• Avoid using or placing this unit near sources of heat.
• Do not use while operating a motorized vehicle. It may create a
• Do not use while operating a motorized vehicle. It may create a
traffic hazard and is illegal in many areas.
• Do not listen with this unit at high volume in places where you need
to hear sounds from the surrounding environment for safety, such
as at railroad crossings, and construction sites.
as at railroad crossings, and construction sites.
∫ Earpieces
• Keep the earpieces out of reach of children to prevent swallowing.
• Securely attach the earpieces. If they are left in the ears after
• Securely attach the earpieces. If they are left in the ears after
coming off, injury or sickness may be caused.
∫ Allergies
• Discontinue use if you experience discomfort with the earphones or
any other parts that directly contact your skin.
• Continued use may cause rashes or other allergic reactions.
Clean this unit with a dry and soft cloth.
• Do not use solvents including benzine, thinner, alcohol, kitchen
• Do not use solvents including benzine, thinner, alcohol, kitchen
detergent, a chemical wiper, etc. This might cause the exterior
case to be deformed or the coating to come off.
case to be deformed or the coating to come off.
∫ General
∫ Water resistant
∫ Bluetooth
®
section
*1 It may be shorter depending on the operating conditions.
*2 Time taken to recharge from empty to full.
*2 Time taken to recharge from empty to full.
Before requesting service, make the following checks. If you are in
doubt about some of the check points, or if the remedies indicated in
the chart do not solve the problem, refer to “Customer Services
Directory” on the rear page if you reside in the U.S.A., or refer to
“CONTACT INFORMATION” on the rear page if you reside in
Canada.
doubt about some of the check points, or if the remedies indicated in
the chart do not solve the problem, refer to “Customer Services
Directory” on the rear page if you reside in the U.S.A., or refer to
“CONTACT INFORMATION” on the rear page if you reside in
Canada.
The unit does not respond.
• This unit can be reset when all operations are rejected. To reset the unit,
• This unit can be reset when all operations are rejected. To reset the unit,
connect the unit to a computer using the USB charging cord. All the
previous operations will be cancelled. (The pairing device information
will not be deleted.)
previous operations will be cancelled. (The pairing device information
will not be deleted.)
Cannot charge the unit.
• Make sure the computer is turned on and is not on standby or sleep
• Make sure the computer is turned on and is not on standby or sleep
mode.
• Is the USB port you are currently using working properly? If your
computer has other USB ports, unplug the connector from its current port
and plug it into one of the other ports.
and plug it into one of the other ports.
• If the measures mentioned above are not applicable, unplug the USB
charging cord and plug it in again.
• If the charge time and operating time become shortened, the battery
may have run down. (Number of charging times of the installed battery:
Approximately 300.)
Approximately 300.)
LED does not light during charging. / Charging takes longer.
• Is the USB charging cord (supplied) connected firmly to the USB
• Is the USB charging cord (supplied) connected firmly to the USB
terminal of the computer? (
l
Rear page,
)
• Make sure to charge in a room temperature between 10 oC and 35 oC.
The power does not turn on.
• Is the unit being charged? The power cannot be turned ON during
The power does not turn on.
• Is the unit being charged? The power cannot be turned ON during
charging. (
l
Rear page,
)
The device cannot be connected.
• Delete the pairing information for this unit from the Bluetooth
• Delete the pairing information for this unit from the Bluetooth
®
device,
then pair them again. (
l
Rear page,
)
No sound.
• Make sure that the unit and the Bluetooth
• Make sure that the unit and the Bluetooth
®
device are connected
correctly. (
l
Rear page,
)
• Check if music is playing on the Bluetooth
®
device.
• Make sure that the unit is turned on and the volume is not set too low.
• Pair and connect the Bluetooth
• Pair and connect the Bluetooth
®
device and the unit again. (
l
Rear
page,
)
• Check if the Bluetooth
®
compatible device supports “A2DP” profile. For
details on profiles, see “Listening to music” (
l
Rear page,
). Also
refer to the operating manual for the Bluetooth
®
compatible device.
Low volume.
• Increase the volume of the unit. (
• Increase the volume of the unit. (
l
Rear page,
)
• Increase the volume on the Bluetooth
®
device.
Sound from the device is cut off. / Sound quality is bad.
• Sound may be disrupted if signals are blocked. Do not fully cover this
• Sound may be disrupted if signals are blocked. Do not fully cover this
unit with the palm of your hand, etc.
• The device may be out of the 10 m communication range. Move the
device closer to this unit.
• Remove any obstacle between this unit and the device.
• Switch off any wireless LAN device when not in use.
• A communication problem may arise if the battery is not fully charged.
• Switch off any wireless LAN device when not in use.
• A communication problem may arise if the battery is not fully charged.
Charge the unit. (
l
Rear page,
)
You cannot hear the other person.
• Make sure that the unit and the Bluetooth
• Make sure that the unit and the Bluetooth
®
enabled phone are turned on.
• Check if the unit and the Bluetooth
®
enabled phone are connected.
(
l
Rear page,
)
• Check the audio settings of the Bluetooth
®
enabled phone. Switch the
calling device to the unit if it is set to the Bluetooth
®
enabled phone.
(
l
Rear page,
)
• If the volume of the other person’s voice is too low, increase the volume
of both the unit and the Bluetooth
®
enabled phone.
Cannot make a phone call.
• Check if the Bluetooth
• Check if the Bluetooth
®
compatible device supports “HSP” or “HFP”
profile. For details on profiles, see “Listening to music” (
l
Rear page,
) and “Making a phone call” (
l
Rear page,
). Also refer to the
operating manual for the Bluetooth
®
enabled phone.
User memo:
∫ Unit
• Avoid using or placing this unit near sources of heat.
• Do not use while operating a motorized vehicle. It may create a
• Do not use while operating a motorized vehicle. It may create a
traffic hazard and is illegal in many areas.
• Do not listen with this unit at high volume in places where you need
to hear sounds from the surrounding environment for safety, such
as at railroad crossings, and construction sites.
as at railroad crossings, and construction sites.
∫ Earpieces
• Keep the earpieces out of reach of children to prevent swallowing.
• Securely attach the earpieces. If they are left in the ears after
• Securely attach the earpieces. If they are left in the ears after
coming off, injury or sickness may be caused.
∫ Allergies
• Discontinue use if you experience discomfort with the earphones or
any other parts that directly contact your skin.
• Continued use may cause rashes or other allergic reactions.
Clean this unit with a dry and soft cloth.
• Do not use solvents including benzine, thinner, alcohol, kitchen
• Do not use solvents including benzine, thinner, alcohol, kitchen
detergent, a chemical wiper, etc. This might cause the exterior
case to be deformed or the coating to come off.
case to be deformed or the coating to come off.
∫ General
∫ Water resistant
∫ Bluetooth
®
section
*1 It may be shorter depending on the operating conditions.
*2 Time taken to recharge from empty to full.
*2 Time taken to recharge from empty to full.
Avant d’appeler un centre de service, faire les vérifications décrites
ci-dessous. En cas de doute sur certains des points de vérification,
ou si les solutions proposées ne résolvent pas le problème
rencontré, se reporter à la section “DEMANDE DE
RENSEIGNEMENTS” à la page arrière.
The unit does not respond.
• This unit can be reset when all operations are rejected. To reset the unit,
ci-dessous. En cas de doute sur certains des points de vérification,
ou si les solutions proposées ne résolvent pas le problème
rencontré, se reporter à la section “DEMANDE DE
RENSEIGNEMENTS” à la page arrière.
The unit does not respond.
• This unit can be reset when all operations are rejected. To reset the unit,
connect the unit to a computer using the USB charging cord. All the
previous operations will be cancelled. (The pairing device information
will not be deleted.)
previous operations will be cancelled. (The pairing device information
will not be deleted.)
Cannot charge the unit.
• Make sure the computer is turned on and is not on standby or sleep
• Make sure the computer is turned on and is not on standby or sleep
mode.
• Is the USB port you are currently using working properly? If your
computer has other USB ports, unplug the connector from its current port
and plug it into one of the other ports.
and plug it into one of the other ports.
• If the measures mentioned above are not applicable, unplug the USB
charging cord and plug it in again.
• If the charge time and operating time become shortened, the battery
may have run down. (Number of charging times of the installed battery:
Approximately 300.)
Approximately 300.)
LED does not light during charging. / Charging takes longer.
• Is the USB charging cord (supplied) connected firmly to the USB
• Is the USB charging cord (supplied) connected firmly to the USB
terminal of the computer? (
l
Rear page,
)
• Make sure to charge in a room temperature between 10 oC and 35 oC.
The power does not turn on.
• Is the unit being charged? The power cannot be turned ON during
The power does not turn on.
• Is the unit being charged? The power cannot be turned ON during
charging. (
l
Rear page,
)
The device cannot be connected.
• Delete the pairing information for this unit from the Bluetooth
• Delete the pairing information for this unit from the Bluetooth
®
device,
then pair them again. (
l
Rear page,
)
No sound.
• Make sure that the unit and the Bluetooth
• Make sure that the unit and the Bluetooth
®
device are connected
correctly. (
l
Rear page,
)
• Check if music is playing on the Bluetooth
®
device.
• Make sure that the unit is turned on and the volume is not set too low.
• Pair and connect the Bluetooth
• Pair and connect the Bluetooth
®
device and the unit again. (
l
Rear
page,
)
• Check if the Bluetooth
®
compatible device supports “A2DP” profile. For
details on profiles, see “Listening to music” (
l
Rear page,
). Also
refer to the operating manual for the Bluetooth
®
compatible device.
Low volume.
• Increase the volume of the unit. (
• Increase the volume of the unit. (
l
Rear page,
)
• Increase the volume on the Bluetooth
®
device.
Sound from the device is cut off. / Sound quality is bad.
• Sound may be disrupted if signals are blocked. Do not fully cover this
• Sound may be disrupted if signals are blocked. Do not fully cover this
unit with the palm of your hand, etc.
• The device may be out of the 10 m communication range. Move the
device closer to this unit.
• Remove any obstacle between this unit and the device.
• Switch off any wireless LAN device when not in use.
• A communication problem may arise if the battery is not fully charged.
• Switch off any wireless LAN device when not in use.
• A communication problem may arise if the battery is not fully charged.
Charge the unit. (
l
Rear page,
)
You cannot hear the other person.
• Make sure that the unit and the Bluetooth
• Make sure that the unit and the Bluetooth
®
enabled phone are turned on.
• Check if the unit and the Bluetooth
®
enabled phone are connected.
(
l
Rear page,
)
• Check the audio settings of the Bluetooth
®
enabled phone. Switch the
calling device to the unit if it is set to the Bluetooth
®
enabled phone.
(
l
Rear page,
)
• If the volume of the other person’s voice is too low, increase the volume
of both the unit and the Bluetooth
®
enabled phone.
Cannot make a phone call.
• Check if the Bluetooth
• Check if the Bluetooth
®
compatible device supports “HSP” or “HFP”
profile. For details on profiles, see “Listening to music” (
l
Rear page,
) and “Making a phone call” (
l
Rear page,
). Also refer to the
operating manual for the Bluetooth
®
enabled phone.
Homologation:
∫ Unit
• Avoid using or placing this unit near sources of heat.
• Do not use while operating a motorized vehicle. It may create a
• Do not use while operating a motorized vehicle. It may create a
traffic hazard and is illegal in many areas.
• Do not listen with this unit at high volume in places where you need
to hear sounds from the surrounding environment for safety, such
as at railroad crossings, and construction sites.
as at railroad crossings, and construction sites.
∫ Earpieces
• Keep the earpieces out of reach of children to prevent swallowing.
• Securely attach the earpieces. If they are left in the ears after
• Securely attach the earpieces. If they are left in the ears after
coming off, injury or sickness may be caused.
∫ Allergies
• Discontinue use if you experience discomfort with the earphones or
any other parts that directly contact your skin.
• Continued use may cause rashes or other allergic reactions.
Clean this unit with a dry and soft cloth.
• Do not use solvents including benzine, thinner, alcohol, kitchen
• Do not use solvents including benzine, thinner, alcohol, kitchen
detergent, a chemical wiper, etc. This might cause the exterior
case to be deformed or the coating to come off.
case to be deformed or the coating to come off.
∫ General
∫ Water resistant
∫ Bluetooth
®
section
*1 It may be shorter depending on the operating conditions.
*2 Time taken to recharge from empty to full.
*2 Time taken to recharge from empty to full.
Before requesting service, make the following checks. If you are in
doubt about some of the check points, or if the remedies indicated
do not solve the problem, consult your dealer for instructions.
The unit does not respond.
• This unit can be reset when all operations are rejected. To reset the unit,
doubt about some of the check points, or if the remedies indicated
do not solve the problem, consult your dealer for instructions.
The unit does not respond.
• This unit can be reset when all operations are rejected. To reset the unit,
connect the unit to a computer using the USB charging cord. All the
previous operations will be cancelled. (The pairing device information
will not be deleted.)
previous operations will be cancelled. (The pairing device information
will not be deleted.)
Cannot charge the unit.
• Make sure the computer is turned on and is not on standby or sleep
• Make sure the computer is turned on and is not on standby or sleep
mode.
• Is the USB port you are currently using working properly? If your
computer has other USB ports, unplug the connector from its current port
and plug it into one of the other ports.
and plug it into one of the other ports.
• If the measures mentioned above are not applicable, unplug the USB
charging cord and plug it in again.
• If the charge time and operating time become shortened, the battery
may have run down. (Number of charging times of the installed battery:
Approximately 300.)
Approximately 300.)
LED does not light during charging. / Charging takes longer.
• Is the USB charging cord (supplied) connected firmly to the USB
• Is the USB charging cord (supplied) connected firmly to the USB
terminal of the computer? (
l
Rear page,
)
• Make sure to charge in a room temperature between 10 oC and 35 oC.
The power does not turn on.
• Is the unit being charged? The power cannot be turned ON during
The power does not turn on.
• Is the unit being charged? The power cannot be turned ON during
charging. (
l
Rear page,
)
The device cannot be connected.
• Delete the pairing information for this unit from the Bluetooth
• Delete the pairing information for this unit from the Bluetooth
®
device,
then pair them again. (
l
Rear page,
)
No sound.
• Make sure that the unit and the Bluetooth
• Make sure that the unit and the Bluetooth
®
device are connected
correctly. (
l
Rear page,
)
• Check if music is playing on the Bluetooth
®
device.
• Make sure that the unit is turned on and the volume is not set too low.
• Pair and connect the Bluetooth
• Pair and connect the Bluetooth
®
device and the unit again. (
l
Rear
page,
)
• Check if the Bluetooth
®
compatible device supports “A2DP” profile. For
details on profiles, see “Listening to music” (
l
Rear page,
). Also
refer to the operating manual for the Bluetooth
®
compatible device.
Low volume.
• Increase the volume of the unit. (
• Increase the volume of the unit. (
l
Rear page,
)
• Increase the volume on the Bluetooth
®
device.
Sound from the device is cut off. / Sound quality is bad.
• Sound may be disrupted if signals are blocked. Do not fully cover this
• Sound may be disrupted if signals are blocked. Do not fully cover this
unit with the palm of your hand, etc.
• The device may be out of the 10 m communication range. Move the
device closer to this unit.
• Remove any obstacle between this unit and the device.
• Switch off any wireless LAN device when not in use.
• A communication problem may arise if the battery is not fully charged.
• Switch off any wireless LAN device when not in use.
• A communication problem may arise if the battery is not fully charged.
Charge the unit. (
l
Rear page,
)
You cannot hear the other person.
• Make sure that the unit and the Bluetooth
• Make sure that the unit and the Bluetooth
®
enabled phone are turned on.
• Check if the unit and the Bluetooth
®
enabled phone are connected.
(
l
Rear page,
)
• Check the audio settings of the Bluetooth
®
enabled phone. Switch the
calling device to the unit if it is set to the Bluetooth
®
enabled phone.
(
l
Rear page,
)
• If the volume of the other person’s voice is too low, increase the volume
of both the unit and the Bluetooth
®
enabled phone.
Cannot make a phone call.
• Check if the Bluetooth
• Check if the Bluetooth
®
compatible device supports “HSP” or “HFP”
profile. For details on profiles, see “Listening to music” (
l
Rear page,
) and “Making a phone call” (
l
Rear page,
). Also refer to the
operating manual for the Bluetooth
®
enabled phone.
Anotaciones del usuario:
Información útil
(Solo para los países de
América Latina)
(Solo para los países de
América Latina)
English
Safety precautions
For the U.S.A. and Canada only
A lithium ion battery that is recyclable
powers the product you have purchased.
Please call 1-800-8-BATTERY for
information on how to recycle this battery.
powers the product you have purchased.
Please call 1-800-8-BATTERY for
information on how to recycle this battery.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
AND CANADA.
AND CANADA.
This device complies with Part 15 of FCC Rules and Industry
Canada’s licence-exempt RSSs. Operation is subject to the
following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation of this device.
FCC ID: ACJ-RP-BTS35
Model: RP-BTS35
IC: 216A-RPBTS35
This transmitter must not be co-located or operated in conjunction
with any other antenna or transmitter.
This equipment complies with FCC/IC radiation exposure limits
set forth for an uncontrolled environment and meets the FCC
radio frequency (RF) Exposure
Guidelines and RSS-102 of the IC radio frequency (RF) Exposure
rules. This equipment has very low levels of RF energy that is
deemed to comply without testing of specific absorption ratio
(SAR).
Canada’s licence-exempt RSSs. Operation is subject to the
following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation of this device.
FCC ID: ACJ-RP-BTS35
Model: RP-BTS35
IC: 216A-RPBTS35
This transmitter must not be co-located or operated in conjunction
with any other antenna or transmitter.
This equipment complies with FCC/IC radiation exposure limits
set forth for an uncontrolled environment and meets the FCC
radio frequency (RF) Exposure
Guidelines and RSS-102 of the IC radio frequency (RF) Exposure
rules. This equipment has very low levels of RF energy that is
deemed to comply without testing of specific absorption ratio
(SAR).
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:
FCC Note:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
Any unauthorized changes or modifications to this equipment
would void the user’s authority to operate this device.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Responsible Party: Panasonic Corporation of North America
would void the user’s authority to operate this device.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Responsible Party: Panasonic Corporation of North America
Two Riverfront Plaza, Newark, NJ 07102-5490
Support Contact: http://shop.panasonic.com/support
FCC CAUTION
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate this equipment.
responsible for compliance could void the user’s authority to
operate this equipment.
WARNING:
To reduce the risk of fire, electric shock or product damage,
• Do not let water or other liquids drip or splash inside the unit.
• Do not expose accessories (USB charging cord) to rain,
• Do not let water or other liquids drip or splash inside the unit.
• Do not expose accessories (USB charging cord) to rain,
moisture, dripping or splashing.
• Do not place objects filled with liquids, such as vases, on
accessories.
• Use only the recommended accessories.
• Do not remove covers.
• Do not repair this unit by yourself. Refer servicing to
• Do not remove covers.
• Do not repair this unit by yourself. Refer servicing to
qualified service personnel.
Maintenance
Specifications
Power supply
DC 5 V, 500 mA
(Internal battery: 3.7 V
(Li-polymer 90 mAh))
(Internal battery: 3.7 V
(Li-polymer 90 mAh))
Operating time
*1
Approx. 6 hours
Charging time
*2
(25 oC (77 oF)) Approx. 1.5 hours
Charging temperature range
10 oC to 35 oC (50 oF to 95 oF)
Operating temperature range
0 oC to 40 oC (32 oF to 104 oF)
Operating humidity range
35%RH to 80%RH
(no condensation)
(no condensation)
Mass (Weight)
Approx. 20 g (0.7 oz)
Water resistant
IPX4 equivalent
Frequency band
2402 MHz to 2480 MHz
Supported profiles
A2DP, AVRCP, HSP, HFP
Supported codec
SBC
Troubleshooting
The serial number of this product can be found on the tag.
Please note them in the space provided below and keep for future
reference.
MODEL NUMBER RP-BTS35
SERIAL NUMBER
Please note them in the space provided below and keep for future
reference.
MODEL NUMBER RP-BTS35
SERIAL NUMBER
DATE OF PURCHASE
DEALER NAME
DEALER ADDRESS
TELEPHONE NUMBER
DEALER NAME
DEALER ADDRESS
TELEPHONE NUMBER
B
B
D
D
D
F
F
B
D
D
F
F
Français
Précautions de sécurité
Uniquement pour les États-Unis et le Canada
L’appareil que vous vous êtes procuré est
alimenté par une batterie au lithium-ion.
Pour des renseignements sur le recyclage
de la batterie, veuillez composer le
1-800-8-BATTERY.
alimenté par une batterie au lithium-ion.
Pour des renseignements sur le recyclage
de la batterie, veuillez composer le
1-800-8-BATTERY.
CE QUI SUIT NE S’APPLIQUE QU’AUX
ÉATS-UNIS ET AU CANADA.
ÉATS-UNIS ET AU CANADA.
Le présent appareil est conforme à la partie 15 des règles de la
FCC et aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
FCC ID: ACJ-RP-BTS35
Modèle: RP-BTS35
IC: 216A-RPBTS35
Cet équipement est conforme aux limites d’exposition aux
rayonnements énoncées pour un environnement non contrôlé et
respecte les règles d’exposition radioélectriques (RF) de la FCC
et les lignes directrices d’exposition aux fréquences
radioélectriques (RF) CNR-102 de l’IC. Cet équipement émet une
énergie RF très faible qui est considérée conforme sans
évaluation du débit d’absorption spécifique (DAS).
FCC et aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
FCC ID: ACJ-RP-BTS35
Modèle: RP-BTS35
IC: 216A-RPBTS35
Cet équipement est conforme aux limites d’exposition aux
rayonnements énoncées pour un environnement non contrôlé et
respecte les règles d’exposition radioélectriques (RF) de la FCC
et les lignes directrices d’exposition aux fréquences
radioélectriques (RF) CNR-102 de l’IC. Cet équipement émet une
énergie RF très faible qui est considérée conforme sans
évaluation du débit d’absorption spécifique (DAS).
WARNING:
To reduce the risk of fire, electric shock or product damage,
• Do not let water or other liquids drip or splash inside the unit.
• Do not expose accessories (USB charging cord) to rain,
• Do not let water or other liquids drip or splash inside the unit.
• Do not expose accessories (USB charging cord) to rain,
moisture, dripping or splashing.
• Do not place objects filled with liquids, such as vases, on
accessories.
• Use only the recommended accessories.
• Do not remove covers.
• Do not repair this unit by yourself. Refer servicing to
• Do not remove covers.
• Do not repair this unit by yourself. Refer servicing to
qualified service personnel.
Maintenance
Specifications
Power supply
DC 5 V, 500 mA
(Internal battery: 3.7 V
(Li-polymer 90 mAh))
(Internal battery: 3.7 V
(Li-polymer 90 mAh))
Operating time
*1
Approx. 6 hours
Charging time
*2
(25 oC (77 oF)) Approx. 1.5 hours
Charging temperature range
10 oC to 35 oC (50 oF to 95 oF)
Operating temperature range
0 oC to 40 oC (32 oF to 104 oF)
Operating humidity range
35%RH to 80%RH
(no condensation)
(no condensation)
Mass (Weight)
Approx. 20 g (0.7 oz)
Water resistant
IPX4 equivalent
Frequency band
2402 MHz to 2480 MHz
Supported profiles
A2DP, AVRCP, HSP, HFP
Supported codec
SBC
Troubleshooting
The serial number of this product can be found on the tag.
Veuillez le noter dans l’espace fourni ci-dessous, et conserver le
tout pour référence future.
NUMÉRO DE MODÈLE RP-BTS35
NUMÉRO DE SÉRIE
tout pour référence future.
NUMÉRO DE MODÈLE RP-BTS35
NUMÉRO DE SÉRIE
DATE D’ACHAT
DÉTAILLANT
ADRESSE DU DÉTAILLANT
Nº DE TÉLÉPHONE
DÉTAILLANT
ADRESSE DU DÉTAILLANT
Nº DE TÉLÉPHONE
B
B
D
D
D
F
F
B
D
D
F
F
Español
Precauciones de seguridad
LO QUE SIGUE SE APLICA SOLAMENTE EN LOS
ESTADOS UNIDOS Y EL CANADÁ.
ESTADOS UNIDOS Y EL CANADÁ.
Este dispositivo cumple con la(s) norma(s) para dispositivos
exentos de licencia RSS de Industry Canada. El funcionamiento
está sujeto a las dos siguientes condiciones:
(1) este dispositivo no puede producir interferencias y
(2) este dispositivo debe aceptar cualquier interferencia,
incluyendo aquellas que puedan ocasionar un funcionamiento no
deseado del mismo.
ID FCC: ACJ-RP-BTS35
Modelo: RP-BTS35
IC: 216A-RPBTS35
Este transmisor no debe colocarse o hacerse funcionar junto con
otra antena o transmisor
Este dispositivo cumple los límites de exposición a la radiación de
la FCC/IC establecidos para un entorno no controlado, así como
las directrices de exposición a radio frecuencia (RF) de la FCC y
la RSS-102 de las reglas de exposición a radio frecuencia (RF)
de la IC.
Este equipo presenta niveles muy bajos de energía RF que se
estima cumplen sin necesidad de comprobar la relación
específica de absorción (SAR).
exentos de licencia RSS de Industry Canada. El funcionamiento
está sujeto a las dos siguientes condiciones:
(1) este dispositivo no puede producir interferencias y
(2) este dispositivo debe aceptar cualquier interferencia,
incluyendo aquellas que puedan ocasionar un funcionamiento no
deseado del mismo.
ID FCC: ACJ-RP-BTS35
Modelo: RP-BTS35
IC: 216A-RPBTS35
Este transmisor no debe colocarse o hacerse funcionar junto con
otra antena o transmisor
Este dispositivo cumple los límites de exposición a la radiación de
la FCC/IC establecidos para un entorno no controlado, así como
las directrices de exposición a radio frecuencia (RF) de la FCC y
la RSS-102 de las reglas de exposición a radio frecuencia (RF)
de la IC.
Este equipo presenta niveles muy bajos de energía RF que se
estima cumplen sin necesidad de comprobar la relación
específica de absorción (SAR).
LOS SIGUIENTES PUNTOS SOLO SON
APLICABLES A LOS EE.UU.
Nota FCC:
APLICABLES A LOS EE.UU.
Nota FCC:
Los ensayos realizados con este equipo han demostrado que
cumple con los límites para dispositivos digitales de Clase B,
conforme a la Parte 15 de las reglas FCC.
Estos límites están diseñados para proporcionar una protección
razonable contra las interferencias dañinas en una instalación
doméstica. Este equipo genera, utiliza y puede radiar energía de
radiofrecuencia y, si no se instala y utiliza conforme a las
instrucciones, puede ocasionar interferencias dañinas a las
comunicaciones de radio. Sin embargo, no existe garantía alguna
de que la interferencia no se produzca en una instalación
determinada. Si este equipo ocasiona interferencias dañinas en
la recepción de radio o televisión, lo que puede determinarse
apagando y encendiendo el equipo, el usuario deberá intentar
corregir la interferencia siguiendo alguno de los procedimientos
que figuran a continuación:
• Reorientar cambiar de lugar la antena receptora.
• Incrementar la separación entre el equipo y el receptor.
• Conectar el equipo a una toma de un circuito distinto al circuito
cumple con los límites para dispositivos digitales de Clase B,
conforme a la Parte 15 de las reglas FCC.
Estos límites están diseñados para proporcionar una protección
razonable contra las interferencias dañinas en una instalación
doméstica. Este equipo genera, utiliza y puede radiar energía de
radiofrecuencia y, si no se instala y utiliza conforme a las
instrucciones, puede ocasionar interferencias dañinas a las
comunicaciones de radio. Sin embargo, no existe garantía alguna
de que la interferencia no se produzca en una instalación
determinada. Si este equipo ocasiona interferencias dañinas en
la recepción de radio o televisión, lo que puede determinarse
apagando y encendiendo el equipo, el usuario deberá intentar
corregir la interferencia siguiendo alguno de los procedimientos
que figuran a continuación:
• Reorientar cambiar de lugar la antena receptora.
• Incrementar la separación entre el equipo y el receptor.
• Conectar el equipo a una toma de un circuito distinto al circuito
en el que está conectado el receptor.
• Consultar con el proveedor o con un técnico de radio/TV
experimentado para obtener ayuda.
Cualquier cambio o modificación no autorizados que se realicen
en el equipo anulará la capacidad del usuario para hacer
funcionar este dispositivo.
Este dispositivo cumple la Parte 15 de las reglas FCC. El
funcionamiento está sujeto a las dos siguientes condiciones: (1)
este dispositivo no puede producir interferencias y (2) este
dispositivo debe aceptar cualquier interferencia, incluyendo
aquellas que puedan ocasionar un funcionamiento no deseado
del mismo.
Parte responsable: Panasonic Corporation of North America
en el equipo anulará la capacidad del usuario para hacer
funcionar este dispositivo.
Este dispositivo cumple la Parte 15 de las reglas FCC. El
funcionamiento está sujeto a las dos siguientes condiciones: (1)
este dispositivo no puede producir interferencias y (2) este
dispositivo debe aceptar cualquier interferencia, incluyendo
aquellas que puedan ocasionar un funcionamiento no deseado
del mismo.
Parte responsable: Panasonic Corporation of North America
Two Riverfront Plaza, Newark, NJ 07102-5490
Contacto de asistencia: http://shop.panasonic.com/support
PRECAUCIÓN FCC:
Cualquier cambio o modificación no autorizados que se realicen
en el equipo anulará la capacidad del usuario para hacer
funcionar este dispositivo.
en el equipo anulará la capacidad del usuario para hacer
funcionar este dispositivo.
WARNING:
To reduce the risk of fire, electric shock or product damage,
• Do not let water or other liquids drip or splash inside the unit.
• Do not expose accessories (USB charging cord) to rain,
• Do not let water or other liquids drip or splash inside the unit.
• Do not expose accessories (USB charging cord) to rain,
moisture, dripping or splashing.
• Do not place objects filled with liquids, such as vases, on
accessories.
• Use only the recommended accessories.
• Do not remove covers.
• Do not repair this unit by yourself. Refer servicing to
• Do not remove covers.
• Do not repair this unit by yourself. Refer servicing to
qualified service personnel.
Maintenance
Specifications
Power supply
DC 5 V, 500 mA
(Internal battery: 3.7 V
(Li-polymer 90 mAh))
(Internal battery: 3.7 V
(Li-polymer 90 mAh))
Operating time
*1
Approx. 6 hours
Charging time
*2
(25 oC (77 oF)) Approx. 1.5 hours
Charging temperature range
10 oC to 35 oC (50 oF to 95 oF)
Operating temperature range
0 oC to 40 oC (32 oF to 104 oF)
Operating humidity range
35%RH to 80%RH
(no condensation)
(no condensation)
Mass (Weight)
Approx. 20 g (0.7 oz)
Water resistant
IPX4 equivalent
Frequency band
2402 MHz to 2480 MHz
Supported profiles
A2DP, AVRCP, HSP, HFP
Supported codec
SBC
Troubleshooting
The serial number of this product can be found on the tag.
Anótelo en el espacio suministrado abajo y guárdelo para futuras
referencias.
MODELO RP-BTS35
NÚMERO DE SERIE
referencias.
MODELO RP-BTS35
NÚMERO DE SERIE
FECHA DE ADQUISICIÓN
NOMBRE DEL CONCESIONARIO
DIRECCIÓN DEL CONCESIONARIO
NÚMERO DE TELÉFONO
NOMBRE DEL CONCESIONARIO
DIRECCIÓN DEL CONCESIONARIO
NÚMERO DE TELÉFONO
B
B
D
D
D
F
F
B
D
D
F
F
Atención al Cliente
Directorio de Atención al cliente
Obtenga información de productos y asistencia operativa, localice el Centro
de Servicio más cercano y compre repuestos y accesorios a través de
nuestro Sitio Web o llamando a nuestro Contact Center:
de Servicio más cercano y compre repuestos y accesorios a través de
nuestro Sitio Web o llamando a nuestro Contact Center:
PAIS
SITIO WEB
CONTACT CENTER
Panamá
www.panasonic.com/pa/soporte/
800-7262
Colombia
www.panasonic.com/co/soporte/
01-8000-947262
Ecuador
www.panasonic.com/ec/soporte/
1-800-726276
Costa Rica
www.panasonic.com/cr/soporte/
800-7262737
El Salvador
www.panasonic.com/sv/soporte/
800-7262
Guatemala
www.panasonic.com/gt/soporte/
1-801-811-7262
Uruguay
www.panasonic.com/uy/soporte/
0-800-7262
Paraguay
www.panasonic.com/uy/soporte/
0-800-11-7262
Chile
www.panasonic.com/cl/soporte/
800-390-602
022-797-5000
022-797-5000
Perú
www.panasonic.com/pe/soporte/
0800-00726
Venezuela
www.panasonic.com/ve/soporte/
800-7262-800
México
www.panasonic.com/mx/soporte/
01800-847-7262
55-5000-1200
55-5000-1200
Argentina
www.panasonic.com/ar/soporte/
0800-333-7262
0810-321-7262
0810-321-7262
R. Dominicana
www.panasonic.com/do/soporte/
809-200-8000
TQBM0175-RP-BTS35_PP_eng.fm 5 ページ 2017年8月21日 月曜日 午後2時27分