ICOM 272105 ユーザーズマニュアル

16

4

■ Default setting

The following functions are assigned to each programmable
key as the default. However, the assigned function can be
changed by your dealer. Ask your dealer for details.

NOTE: [TX Code Enter] must be assigned to any key.

[P0]; Call

: Push to transmit a 5-tone/BIIS call

when the selected channel is a 5-
tone or MSK channel, respectively.

[P1]; Digital

: Push to select the call list ID/trans-

mit message, or to display the
receive message record for selec-
tion.

[P3]; TX Code Enter

: Push to enter the direct ID code edit

mode for both 5-tone and MSK.

[UP]/[DOWN]; CH Up/Down

: While in the standby condition,

selects the operating channel.

After pushing [Digital] or [TX Code

CH Select], selects call list or TX
code channel, respectively.

[MONITOR]; Moni(Audi): Push this key after the communica-

tion to send a ‘Clear down’ signal
during MSK channel operation.

[P2]/[RED]; Null

: No function is assigned.

■ Receiving a call

D

D Individual call

q When an individual call is received;

• Beeps sound.
• “

” appears and the mute is released.

• The programmed text message (e.g.“

”) and the calling

station ID (or text) is displayed alternately, depending on the set-
ting.

• “

” appears or blinks depending on the setting.

w Push and hold [PTT], then speak into the microphone at a

normal voice level.

• “

” indicator appears.

e Release [PTT] to return to receive.

• “

” appears while receiving a signal.

r To finish the conversation, push [MONITOR] (Moni(Audi))

to send the ‘Clear down’ signal. 

• Either station can send a ‘Clear down’ signal.
• “

” is displayed for 2 sec. (approx.).

• “

” disappears and the transceiver returns to the standby condi-

tion.

Appears or blinks

Appears

IC-F43GT_GS.qxd  04.4.9 1:10 PM  Page 16 (1,1)