ICOM 325300 ユーザーズマニュアル
38
6
MEMORY/CALL CHANNELS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Contents of programmed memories can be cleared (erased),
if desired.
if desired.
q Push and hold [S.MW](V/M/C) for 1 sec. to enter the select
memory write mode.
• 1 short and 1 long beep sound.
• “
• “
” icon and memory channel number blink.
• Do not hold [S.MW](V/M/C) for more than 2 seconds otherwise
the memory contents will be copied to the VFO mode.
w Rotate [DIAL] to select a desired memory channel to be
cleared.
e Push [SET] repeatedly to select “CLEAR.”
r Push and hold [S.MW](V/M/C) for 1 sec. to clear the con-
tents.
• 3 beeps sound.
• The cleared channel changes to blank channel
• Return to the select memory write mode.— Memory channel
• The cleared channel changes to blank channel
• Return to the select memory write mode.— Memory channel
number blinks. Push [H/M/L] to exit the select memory write
mode.
mode.
NOTE: Be careful!— the contents of cleared memories
CANNOT be recalled.
CANNOT be recalled.
[DIAL]
The VFO mode
Enter the select memory write mode.
to select a desired channel.
Rotate
Push and hold
for 1 sec.
Channel 14
Push
repeatedly to select “CLEAR.”
Push and hold
for 1 sec to clear and return to the VFO mode.
[EXAMPLE]: Clearing memory channel 14.
N Memory clearing