ICOM AP-3 ユーザーズマニュアル
PANEL DESCRIPTION
2
8
■
Front and rear panels (continued)
This switch is used to switch the polarity of the [ETHER-
NET] port.
The switch has the following two positions based on dif-
ferences in Ethernet cable type and the hub port being
used.
[PC]:
NET] port.
The switch has the following two positions based on dif-
ferences in Ethernet cable type and the hub port being
used.
[PC]:
This position sets the [ETHERNET] port to cross-
over mode (symbol:
over mode (symbol:
✕
).
Use this setting when an Ethernet cable (straight
cable) is used to connect the AP-3 unit to the
straight port (symbol: =) of a hub or the port (sym-
bol: =) on the Ethernet card side of a computer.
(
cable) is used to connect the AP-3 unit to the
straight port (symbol: =) of a hub or the port (sym-
bol: =) on the Ethernet card side of a computer.
(
☞
p. 14)
[HUB]: This position sets the [ETHERNET] port to
straight mode (symbol: =).
Use this setting when an Ethernet cable (straight
connection) is used to connect the AP-3 unit to the
cross-over port (symbol:
Use this setting when an Ethernet cable (straight
connection) is used to connect the AP-3 unit to the
cross-over port (symbol:
✕
) of a hub. (
☞
p. 15)
!0
[HUB/PC] switch ······
This is a slot for inserting an ICOM wireless LAN card.
(
(
☞
p. 10)
* Turn of the power to the AP-3 unit before inserting or
removing the LAN card.
* This slot is compatible with any ICOM wireless LAN
card. (as of May 2000).
* When the SL-1100 LAN card is used with the AP-3 unit,
use the same model of LAN card with the client as well.
!1
PCMCIA slot ·············