ICOM AP-3 Manual De Usuario

PANEL DESCRIPTION

2

8

■

Front and rear panels (continued)

This switch is used to switch the polarity of the [ETHER-
NET] port.
The switch has the following two positions based on dif-
ferences in Ethernet cable type and the hub port being
used.
[PC]:

This position sets the [ETHERNET] port to cross-
over mode (symbol: 

✕

). 

Use this setting when an Ethernet cable (straight
cable) is used to connect the AP-3 unit to the
straight port (symbol: =) of a hub or the port (sym-
bol: =) on the Ethernet card side of a computer.
(

☞ 

p. 14)

[HUB]: This position sets the [ETHERNET] port to

straight mode (symbol: =). 
Use this setting when an Ethernet cable (straight
connection) is used to connect the AP-3 unit to the
cross-over port (symbol: 

✕

) of a hub. (

☞

p. 15)

!0

This is a slot for inserting an ICOM wireless LAN card.
(

☞

p. 10)

* Turn of the power to the AP-3 unit before inserting or

removing the LAN card.

* This slot is compatible with any ICOM wireless LAN

card. (as of May 2000).

* When the SL-1100 LAN card is used with the AP-3 unit,

use the same model of LAN card with the client as well.

!1