Inkmachines Sweden AB TPS-500 ユーザーズマニュアル
User interface
InkMachines
TPS-500
Rev 3.0 / 2018-05-25
23 (27)
Press the left and right arrow keys when
selecting
selecting
PAIR FOOTSWITCH
Pair a foot switch to the Main unit (See page 23).
UNPAIR FOOTSWITCH
Unpair a foot switch from the Main unit (See
page 23).
page 23).
UNPAIR POWERPACKS
Unpair all Powerpacks from the Main unit.
WIRELESS CHANNEL
If there is interference in the communication
between the units, it is possible to switch
channel.
between the units, it is possible to switch
channel.
Choose WIRELESS CHANNEL in the settings
menu. Change channel with up and down keys.
Active channel is shown on the display.
menu. Change channel with up and down keys.
Active channel is shown on the display.
After the channel have been changed should the
powerpacks be placed in the charger.
powerpacks be placed in the charger.
NEORAIL
Setting of brightness for LED lights on Neorail
(see page 5); RED; BLUE, WHITE
(see page 5); RED; BLUE, WHITE
Pairing
The pairing function is essential, so the Main unit can provide the correct signals to the Active Powerpack and
the correct Foot switch.
the correct Foot switch.
Powerpack
The Powerpacks will be paired automatically to the Main unit when they are set in the charger. Each Main unit
can have 6 Powerpacks paired. The number of paired powerpacks will be shown on the lower part of the
display.
can have 6 Powerpacks paired. The number of paired powerpacks will be shown on the lower part of the
display.
It is possible to have several Main units in the room, then you will be able to borrow Powerpacks from other
Main units.
Main units.
The Powerpacks will automatically unpair from the "old" unit and pair to the "new" unit once the Powerpack is
set in the charger of the "new unit".
set in the charger of the "new unit".
Footswitch
The
running symbol(b) will be shown on the display when the foot switch is pressed and working
properly.
properly.
To connect the foot switch, choose PAIR FOOTSWITCH from the Settings menu. There will be 3 activities to
perform/accept on the Main unit before the Footswitch is paired. Chose OK to continue or Back(j) to abort.
perform/accept on the Main unit before the Footswitch is paired. Chose OK to continue or Back(j) to abort.
Note! Make sure no other footswitch is being used during pairing!
PLEASE PRESS 5 TIMES FAST
ON THE FOOT SWITCH
BEFORE THE TIMER REACHES 0.
TIME LEFT 12 SECS