Rigado Inc. 10 ユーザーズマニュアル
BMD-340 Module Datasheet
Bluetooth 5 + 802.15.4
May 21, 2018
BMD-340-DS V1.0
Page 22 of 31
11.2 Mechanical Enclosure
Care should be taken when designing and placing the module into an enclosure. Metal should be kept clear
from the antenna area, both above and below. Any metal around the module can negatively impact RF
performance.
The module is designed and tuned for the antenna and RF components to be in free air. Any potting, epoxy fill,
plastic over-molding, or conformal coating can negatively impact RF performance and must be evaluated by
the customer.
from the antenna area, both above and below. Any metal around the module can negatively impact RF
performance.
The module is designed and tuned for the antenna and RF components to be in free air. Any potting, epoxy fill,
plastic over-molding, or conformal coating can negatively impact RF performance and must be evaluated by
the customer.
11.3 Antenna Patterns
Antenna patterns are based on the BMD-340 Evaluation Kit with a ground plane size of 109mm x 56mm. X-Y-Z
orientation is shown in Figure 16:
orientation is shown in Figure 16:
Figure 16 – X-Y-Z Antenna Orientation