Unicorn Srl MMMFD ユーザーズマニュアル
START WITH FEVER
POWER ON: Long press to switch between ON and OFF.
MODE SELECTION: Select the MODE by pressing the M
Button or inserting a Micro-SD.
POWER LED: near the micro USB
• Red light Indicates that Fever is in charge mode through
USB 5V.
• Green light indicates that Fever is fully charged.
BLUETOOTH LED: bottom left.
• Blinking Blue: Bluetooth search mode
• Steady Blue: Connected via Bluetooth
• Light Off: LINE IN, Micro-SD card reader or FM Radio mode.
See Mode LED
MODE LED: bottom right.
• Red Light: LINE IN mode
• Green Light: Micro-SD reader mode
• Light Off: FM Radio mode
POWER ON: Long press to switch between ON and OFF.
MODE SELECTION: Select the MODE by pressing the M
Button or inserting a Micro-SD.
POWER LED: near the micro USB
• Red light Indicates that Fever is in charge mode through
USB 5V.
• Green light indicates that Fever is fully charged.
BLUETOOTH LED: bottom left.
• Blinking Blue: Bluetooth search mode
• Steady Blue: Connected via Bluetooth
• Light Off: LINE IN, Micro-SD card reader or FM Radio mode.
See Mode LED
MODE LED: bottom right.
• Red Light: LINE IN mode
• Green Light: Micro-SD reader mode
• Light Off: FM Radio mode
BATTERY RECHARGE
Power Off Fever and connect it to a PC or to a 5V power supply
using the microUSB-USB cable. During the battery recharge
the POWER LED is on, it turns GREEN when fully charged. (2-3
hours).
For best battery operation and prolonged battery lifespan disconnect
after charging.
Use the device on battery power until it needs to be charged
again.
Power Off Fever and connect it to a PC or to a 5V power supply
using the microUSB-USB cable. During the battery recharge
the POWER LED is on, it turns GREEN when fully charged. (2-3
hours).
For best battery operation and prolonged battery lifespan disconnect
after charging.
Use the device on battery power until it needs to be charged
again.
OPERATION MODES
Bluetooth MODE
Press the “M” button until Fever switches to the Bluetooth
mode (Bluetooth LED on).
Search for Bluetooth devices and locate the list of discovered
Bluetooth devices. From the Bluetooth device list, select the
device named “Vibe-Tribe Fever” and connect to it. During the
Bluetooth operational mode, all the functions can be controlled
either through the Bluetooth Source or the Bottom Control
Panel:
• PAUSE/PLAY: short press “ ” Button
• Volume Control: long press “+”/“-”
• Track Control: short press “+” / “-”
When connected to a Bluetooth phone Handsfree function is
enabled:
• Manage a Call: short press “ ” Button
Press the “M” button until Fever switches to the Bluetooth
mode (Bluetooth LED on).
Search for Bluetooth devices and locate the list of discovered
Bluetooth devices. From the Bluetooth device list, select the
device named “Vibe-Tribe Fever” and connect to it. During the
Bluetooth operational mode, all the functions can be controlled
either through the Bluetooth Source or the Bottom Control
Panel:
• PAUSE/PLAY: short press “ ” Button
• Volume Control: long press “+”/“-”
• Track Control: short press “+” / “-”
When connected to a Bluetooth phone Handsfree function is
enabled:
• Manage a Call: short press “ ” Button