Shenzhen Fostar Electronic Co. Ltd FC2501PA ユーザーズマニュアル

60

Pictures Save To: FTP or SD Card. If you have done FTP and Alarm settings, when alarming, the camera will 

snap pictures to the FTP automatically. If select SD Card as the save path, make sure the camera has inserted 

in the SD card. 

To enable capture interval, follow the steps below: 

1 Select Enable timing to capture 

2 Capture interval:The interval time between two captures.   

z Capture anytime 

Click the black button up the MON, you will see all time range turn red. When something moving in the 

detection area at anytime, the camera will capture. 

z Specify an capture schedule 

Click the week day words, the corresponding column will be selected. For example, click TUE, the all 

column of TUE turns to red, that means during Tuesday whole day, the camera will capture. 

z Press the left mouse and drag it on the time boxes, you can select the serial area, 

4 Click Save button to take effect.   

On this page you can set the schedule time for switching IR LED lights. When parameter Mode is set to the 

Schedule on the Live Video window, at these schedule time, the IR LED lights will be turned off. 

Figure 4.47

IP Camera supports Motion Detection Alarm,when the motion has been detected, the IP Camera will make a 

alarm.