Shenzhen Fostar Electronic Co. Ltd FC2501PA ユーザーズマニュアル

62

A Camera Sound and PC Sound

if you select Camera Sound or PC Sound, when the motion has been detected, the people around the camera 

will hear beep alarm sound. 

If you want to receive alarm emails when motion is detected, you must select Send E-mail and set Mail 

Settings first.   

If you select this checkbox, when the motion has been detected, the camera will snap the live view window as 

a still picture and load it to the FTP. Make sure you have set FTP and set FTP as the storage path in 

Video->Snapshot settings panel. 

Capture interval: The interval time between two pictures. 

D Recording(except for FC1403P)

If you select this checkbox, when the motion has been detected, the camera will record automatically and store 

the record files to the SD Card.    Make sure the camera has inserted SD card and you have set the SD card as 

the Alarm record files storage path, please go to Record—> Storage location page to verify this settings. 

The default alarm record time is 30s and pre-alarm record time is 5s, please go to Record—> Alarm Record 

page and change the alarm time settings. 

If IO alarm is triggered and IO alarm output device will always alarm (sound alarm is issued a warning sound, 

alarm lights in flash etc.). Click "Clear IO alarm output" , the alarm output device will stop alarming. If IO alarm 

is triggered again after alarm interval, IO alarm output device will be restart. 

Click set detect area and it pop up a window, then you can draw the detection area. Click OK button after 

settings. When something moving in the detection area, the camera will alarm.