Panduit 1167 ユーザーズマニュアル
SynapSense
®
2.4GHz Industrial Gateway
Hardware Installation Manual
12
Introduction
This chapter provides the scope, overview and kit components for installing and
configuring a SyapSense
configuring a SyapSense
®
2.4GHz Industrial Gateway.
Scope
This document provides guidelines and instructions for installing and configuring the
Industrial Gateway.
Industrial Gateway.
NOTE: Installation of SynapSoft™ software (such as MapSense™) occurs prior to
hardware installation. This installation order prevents redundancy of hardware
verification activities (for example, sensor-to-software communication validation).
See Document References section for document list.
hardware installation. This installation order prevents redundancy of hardware
verification activities (for example, sensor-to-software communication validation).
See Document References section for document list.
Overview
The Model 1167, SynapSense
®
2.4GHz Industrial Gateway, is a wireless, 2.4GHz,
802.15.4 to wired Ethernet gateway that collects data from any of the SynapSense
wireless sensors or meter hardware deployed throughout the plant or data center. For
example, using SynapSense
wireless sensors or meter hardware deployed throughout the plant or data center. For
example, using SynapSense
®
ThermaNode™ environmental sensors, data can be
acquired across the entire active area of the plant or data center. The Model 1167
Industrial Gateway is powered by either a dedicated 24VDC nominal power supply (10-
30Vdcmax) or an IEEE 802.3af Power over Ethernet (POE) compatible network source.
Both power supply connections are designed to provide the user with a worry free
installation; this allows the power supply wiring to be connected to the Model 1167
Industrial Gateway without worrying about the polarity of the power supply’s wiring. If both
supplies are connected, the Industrial Gateway will operate with redundant power
supplies, allowing one of the power supplies to fail without any noticeable data
interruption to the downstream server.
Industrial Gateway is powered by either a dedicated 24VDC nominal power supply (10-
30Vdcmax) or an IEEE 802.3af Power over Ethernet (POE) compatible network source.
Both power supply connections are designed to provide the user with a worry free
installation; this allows the power supply wiring to be connected to the Model 1167
Industrial Gateway without worrying about the polarity of the power supply’s wiring. If both
supplies are connected, the Industrial Gateway will operate with redundant power
supplies, allowing one of the power supplies to fail without any noticeable data
interruption to the downstream server.
Figure 1
shows a block diagram of a typical installation with wireless data from
various sensors arriving at the Industrial Gateway(s), and the Ethernet data path
from the Industrial Gateway(s) to the server via wired IEEE 802.3 Ethernet.
from the Industrial Gateway(s) to the server via wired IEEE 802.3 Ethernet.