Avonwood Developments Ltd ZSR6663 ユーザーズマニュアル

4

5

The Plus Reader is a cost effective solution for active RFID tagging applications using our Eureka RFID technology. 

Designed for both internal or external applications the reader is housed in a rugged weatherproof enclosure.

Applications include personnel and asset tracking, access control and asset identification.

Each reader can be connected to a network enabling tag data to be logged and the device managed via local or 

online services.

The unit is powered by a 24V DC supply or option for power over Ethernet (PoE) enabling easy installation where 

multiple readers are set up on the same network.

Two onboard relays are available to operate auxiliary systems or an alarm on detection of a tag.

The Plus Reader is part of a complete RFID system comprising of the following standard components and accessories:

1.  Plus Reader(s)

2.  Tags (supplied seperately)

1.  Power over Ethernet module

2.  +24VDC Installation Power Supply

3.  External Antenna

The Plus Reader produces a user configurable detection zone between 1m to 4m (or upto 8m with external antenna) 

which interacts with tags worn by personnel.

1.  The Plus Reader creates a detection zone (1 - 4 metres) 

around the unit.

2.  The Plus Reader identifies any tags entering the detection 

zone.

3.  When the tag is identified, the reader will carry out the 

required function:

•  Access Control - open door, barrier, gate or turnstile

•  Alarm on tag detection

•  Identify a particular asset

The example on the right illustrates a pedestrian worker walking 

towards a Plus Reader. When the worker who is wearing a tag 

enters the detection zone, the door automatically opens offering 

a hands free access solution. This helps traffic flow especially 

when people are carrying equipment or pushing trolleys.

Before installation please read the following guidelines to ensure that the system is correctly installed and provides 

optimum performance.

Minimum Requirements

•  24VDC (±5%) 10W supply protected by a 1A anti-surge fuse

Installation Considerations

•  No metal should be within 200mm of the top, bottom and sides of the reader (Figure 1)

•  No metal should be in front of the antenna, for example a grille

200mm

200mm

200mm

200mm