QINGDAO TRI-LINK LOCK GROUP CO. LTD 318SERIES ユーザーズマニュアル

D318T USER MANUAL (Touch Screen Type with Remote Control)

1．TO UNLOCK THE LOCK

1）Using Keypad: Enter a valid User code (default code is 1234) and press

and hear 1 beep and lights green.

2）

Press button on the remote and hear 1 beep and lights green.

2．TO LOCK THE LOCK

1）Using Keypad: Press and then hear 2 beeps and lights red.
2）

Press button on the remote and hear 2beeps and lights red.

3. TO ADD A NEW USER CODE

The User code (UC) must be a 4-8 digit combination. Each User code(UC) is then linked to a User ID (ID),which is any number
between 01-50.
PC-

-1- -ID- -UC- -Re-enter UC-

Hear 1 beep and Light indicator illuminates green.

4．DELETE ONE EXISTING OR PRESET USER CODE

PC-

-2- -Existing ID- -Re-etner ID-

Hear 1 beep and Light indicator illuminates green.

5．DELETE ALL USER CODES

PC-

-3- -Re-enter PC-

Hear 1 beep and Light indicator illuminates green.

6．CHANGE CURRENT OR PRESET PROGRAMMING CODE

PC-

-4- -NEW PC- -Re-enter new PC-

Hear 2 beep and Light indicator illuminates green

7．SET OR CANCEL AUTO LOCK

Set Auto Lock: PC-

-5- -Time Value (20-900 seconds)-

Cancel Auto Lock: PC- -5- -00-

Hear 1 beep and Light indicator illuminates green.

8．TURN ON AND OFF SOUND

PC-

-6- -1 OR 2 - (1=Sound off, 2=Sound on)

Sound off- Light indicator illuminates green
Sound on –Hear 1 beep and Light indicator illuminates green

9．CREATE A TEMPORARY CODE

Temporary aces for house sitter, contactor, cleaning company etc. Use one of the 50 available UC and give it out for temporary
access and delete it when it is no longer required. See steps 3 and 4

10. TO ADD ONE REMOTE CONTROL

（you can add up to 20 remotes, ID from 01~20）

PC－－7－－ID（01－20）－－PRESS ANY BUTTON ON THE REMOTE。

Hear 1 beep and Light indicator illuminates green.

11．DELETE ONE EXISTING REMOTE CONTROL

PC－－8－－Existing ID（01－20）－－re-enter ID－。

Hear 1 beep and Light indicator illuminates green.