Presidio Networked Solutions Inc. AIO3 ユーザーズマニュアル
8
This document contains information and data which is proprietary to Presidio that shall not be duplicated, used, or disclosed - in whole or in part
- for any purpose other than to evaluate this product.
AIO3.0 User’s Manual
PRES058-150422 REV 4
3.0
SYSTEM
OPERATIONS
The following paragraphs describe how to test, set-up and operate each device. Following these
procedures ensures that the device is fully operational after the device is installed.
procedures ensures that the device is fully operational after the device is installed.
a) Prior to installation in a vehicle, the device should be checked for serviceability. This should
begin with a thorough inspection of the exterior of the tracking device housing. The housing
should have no significant signs of damage such as dents or cracks. There should be no sign
of water leakage into the housing.
should have no significant signs of damage such as dents or cracks. There should be no sign
of water leakage into the housing.
b) The device should be fully charged prior to deployment. The AIO3.0 connects to a
standard USB connection on a PC and provides the capability to charge the internal
battery. See the figures below to gain access to the USB charging port.
battery. See the figures below to gain access to the USB charging port.
c) When charging the Status LED will be RED indicating the battery is being charge. If the
LED does not illuminate when connected to the USB port this indicates the battery is
fully charged or that there may be a problem with the USB connection to the PC.
fully charged or that there may be a problem with the USB connection to the PC.
d) Press and hold the Power On/Off button for a brief (1 second) period until the Power
LED turns on. The LED will illuminate sold and then start to flash from a fast to slow