Olympus Winter & Ibe GmbH ESG200 ユーザーズマニュアル
39
System settings
5 System settings
5.1 Operation of the touch screen
CAUTION
Operation of the touch screen
Wrong operation of the touch screen can cause malfunction or damage to the touch screen.
• Only tap one button or pane at a time.
• Only tap the touch screen from the front. Avoid oblique angles when tapping the touch
screen.
• Do not use pointed objects, e.g. a pen, to tap the touch screen.
• Do not tap the touch screen unintentionally.
• Do not apply excessive loads on the surface of the touch screen.
• Remove dust and dirt by wiping the touch screen with a cloth.
Operator's position
- The operator of the touch screen must be in front of the electrosurgical generator.
- For parameter settings the viewing distance must not exceed 50 cm.
- For watching the touch screen the viewing distance must not exceed 100 cm.
- All viewing angles, i.e. left, right, upper, lower angle, must not exceed 70°.
5.2 Overview of system settings
Figure 5.1 Buttons for system settings
The 3 buttons on the right-hand side of the All Screen give access to various system
settings. The following table gives a short introduction to system settings. Detailed
information on the single settings are give in the following sections.
DRAFT
–
2017-01-17