Olympus Winter & Ibe GmbH ESG200 User Manual

39

System settings

Wrong operation of the touch screen can cause malfunction or damage to the touch screen.

 

• Only tap one button or pane at a time.

 

• Only tap the touch screen from the front. Avoid oblique angles when tapping the touch 

screen.

 

• Do not use pointed objects, e.g. a pen, to tap the touch screen.

 

• Do not tap the touch screen unintentionally.

 

• Do not apply excessive loads on the surface of the touch screen.

 

• Remove dust and dirt by wiping the touch screen with a cloth.

 - The operator of the touch screen must be in front of the electrosurgical generator. 

 - For parameter settings the viewing distance must not exceed 50 cm.

 - For watching the touch screen the viewing distance must not exceed 100 cm.

 - All viewing angles, i.e. left, right, upper, lower angle, must not exceed 70°.

The 3 buttons on the right-hand side of the All Screen give access to various system 

settings. The following table gives a short introduction to system settings. Detailed 

information on the single settings are give in the following sections.

DRAFT 

– 

2017-01-17