NEOSEN ENERGY EZI ユーザーズマニュアル
The transmitter is attached to the sheet with a 100% silicone adhesive. Place
dabs of silicone at each of the four corners. Clear or translucent adhesive is
recommended, white is shown here for visibility. Avoid highly contrasting
colors, particularly dark adhesive with more translucent, lighter- colored sheets.
There needs to be enough silicone to fill the gap between the flange and the
dabs of silicone at each of the four corners. Clear or translucent adhesive is
recommended, white is shown here for visibility. Avoid highly contrasting
colors, particularly dark adhesive with more translucent, lighter- colored sheets.
There needs to be enough silicone to fill the gap between the flange and the
surface. Keep the silicone away
from the coil. If for some reason
the transmitter will be replaced,
removal will be easier if the
adhesive is only on the flange and
not in the cavity. If desired, small
amounts of hot melt adhesive
may be placed along opposite
sides to hold the transmitter in
place while the silicone adhesive
cures. The hot melt can be
applied at the edges of the flange
after the transmitter is placed in
the pocket. The transmitter may
be held in place with tape or a
weight while the silicone cures.
the transmitter will be replaced,
removal will be easier if the
adhesive is only on the flange and
not in the cavity. If desired, small
amounts of hot melt adhesive
may be placed along opposite
sides to hold the transmitter in
place while the silicone adhesive
cures. The hot melt can be
applied at the edges of the flange
after the transmitter is placed in
the pocket. The transmitter may
be held in place with tape or a
weight while the silicone cures.
Hot melt adhesive is for temporary bonding only. It is not suitable for long
term mounting.
term mounting.
D.2. Wiring
The transmitter is supplied with a power cord consisting of DC and AC wiring
connected with a transformer. In many cases an AC power outlet may need to
connected with a transformer. In many cases an AC power outlet may need to