InVue F1671 ユーザーズマニュアル
Use the pin removal tool to
disengage the pin on the other band.
disengage the pin on the other band.
9
Pull the tape from the sensor to
activate the alarm
activate the alarm
8
Gently tug the watch band to make
sure it is secured.
sure it is secured.
7
Remove the watch band from the
watch body.
watch body.
10
11
Orient the band clip so that the flat
side of the clip will sit along the top
side of the band.
side of the clip will sit along the top
side of the band.
Flat Side
Slide the clip over the band from the side
with the pin.
with the pin.
Use the pin removal tool to push in
the other side of the pin and pivot the
band into place.
the other side of the pin and pivot the
band into place.
12
Stand Installation:
Use the provided alcohol wipe to
clean the surface where the stand will
be placed. Allow it to dry completely.
clean the surface where the stand will
be placed. Allow it to dry completely.
13
CONTENTS:
One pad saturated in 75%
Isopropyl Alcoho
l
DIRECTIONS:
Apply topically as
needed to cleanse
surface mounting area
.
FOR EXTERNA
L USE ONLY
KEEP OUT OF REACH OF
CHILDREN
KEEP AWAY FROM EY
ES
AND FIRE
Peel the liner from the adhesive on
the bottom of the stand.
the bottom of the stand.
14