Baicells Technologies Co. Ltd. MBS1100 ユーザーズマニュアル
Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx
16
Figure 4-8 Separate the Ethernet Weatherproof Connector
2. Slide the weatherproof connector components in turn. A click should be heard to
ensure that the RJ45 connector has clip into the slot of weatherproof connector, as
shown in Figure 4-9.
Figure 4-9 Install the Ethernet weatherproof Connector
3. Connect the weatherproof connector to the base
station’s DATA interface, and
fasten it.
The alignment of bayonet when connection the weatherproof connector with the
base station. Once aligned, twist it about 90 degrees clockwise.
4. It is necessary for the Ethernet interface to be weatherproofed. Refer to 3.5
Weatherproof Protection for more detail. The connection is complete shown in
Figure 4-10 Connect the Ethernet Interface