Vayyar Imaging Ltd. VMAKER ユーザーズマニュアル
is supplied with a short USB cable suitable primarily for attaching the Walabot to a cellphone or a tablet.
Alternate cables can be used.
Alternate cables can be used.
If you prefer to use the auxiliary port for powering the board, you may attach the board to the
additional power source, such as a power pack or a charger. If a wall charger is used, it is advised to use
a ferrite-loaded cable [refer to exemplary model type].
additional power source, such as a power pack or a charger. If a wall charger is used, it is advised to use
a ferrite-loaded cable [refer to exemplary model type].
Connect the data USB to a hosting device. If needed, connect the auxiliary USB port to the external
power source.
power source.
Software installation
Walabot is operated by application software that needs to be installed on your host device. A variety of
applications and software resources for developing your own applications are found on the Walabot
web site at the address [ADDRESS COMES HERE]. Download the relevant applications, according to the
type of your host device and its operating system (Windows, Android etc.).
applications and software resources for developing your own applications are found on the Walabot
web site at the address [ADDRESS COMES HERE]. Download the relevant applications, according to the
type of your host device and its operating system (Windows, Android etc.).
If relevant, download the appropriate software to begin developing your own applications.
The software contains a driver through which the application software communicates with
Walabot device.
Walabot device.
The driver translates your commands into Walabot’s actions.
Moreover, the driver is in charge of enforcing certain regulatory restrictions.
Be sure to communicate with the Walabot device only through the driver using the provided API.
The documentation of the API is found at [ADDRESS COMES HERE].
Safety
Legal Information
Disclaimers
Trademarks and patents
Regulatory Information
Regulatory Conformance
The Walabot device has been designed to be in compliance with the FCC regulations governing UWB
hand-held systems (Part 15.519) also known as “battery powered devices” or “mobile devices.” This
means that the device can be incorporated in a wide variety of products including educational robots,
pipe locators, breathing monitors, etc. Note that there are other applications which are specifically
forbidden, such as use of the devices in toys. See FCC Parts 15.519 and 15.521 for more details.
hand-held systems (Part 15.519) also known as “battery powered devices” or “mobile devices.” This
means that the device can be incorporated in a wide variety of products including educational robots,
pipe locators, breathing monitors, etc. Note that there are other applications which are specifically
forbidden, such as use of the devices in toys. See FCC Parts 15.519 and 15.521 for more details.