Vayyar Imaging Ltd. VMAKER ユーザーズマニュアル
Certain models of the Walabot device have been designed and tested to be in compliance with CE
requirements, and in particular to conform to ETSI standards EN 302 065-1, EN 301 489-33 and EN 301
489-1. In particular, the CE compliant devices are restricted to operation in the 6-8.5 GHz band. Make
sure that if you use the device outside US, that you order the appropriate model number.
requirements, and in particular to conform to ETSI standards EN 302 065-1, EN 301 489-33 and EN 301
489-1. In particular, the CE compliant devices are restricted to operation in the 6-8.5 GHz band. Make
sure that if you use the device outside US, that you order the appropriate model number.
FCC regulatory statements
This device complies with 47 CFR Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
The user is cautioned that changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
compliance could void the user’s authority to operate the equipment.
This device may not be employed for the operation of toys. Operation onboard an aircraft, a ship or a
satellite is prohibited.
satellite is prohibited.
The use of this device mounted on outdoor structures, e.g., on the outside of a building or on a telephone
pole, or any fixed outdoors infrastructure is prohibited.
pole, or any fixed outdoors infrastructure is prohibited.
Moreover, the following statements apply:
N
OTE
: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC ID Labels
The Walabot products have a FCC ID of 2AHIS-VMAKER. The FCC ID marking is found on the right lower
front side of the printed circuit board.
front side of the printed circuit board.