Marmitek UM7206 08944 プリント

© MARMITEK

22794/20101025

The UM7206 contains an isolated contact relay and a piezo sounder (beeper). It can be set to operate as a beeper only, as an isolated contact relay only, or both. It can be set for 
momentary or continous operation for the sounder and/or isolated contact relay. The isolated contact relay is rated for 5 A at 24 VDC.
When set to continous operation the relay contacts and/or the module beeps continously when an ON command is received. When an OFF command is received the relay contacts 
open and/or the beeper stops.
When set for momentary operation the relay contacts close and/or the beeper gives three or  four beeps when an ON command is received. The relay contacts then open automati-
cally after about 0,5 second and/ or the beeper stops automatically after three or four beeps. In this mode, OFF commands are ignored.
The module has a test (ON) button and a unit OFF button.

Supply voltage  

230V ±10% 50 Hz

Power consumption 

 

≤ 1 W

Making capacity  

5 A at 24 VDC

Signal sensitivity 

15 mVpp min 50 mVpp max at 120 kHz

Input impedance  

≥ 55 Ohms (L - N) at 120 kHz

X-10 Key codes receiving  On, Off.

Connectors 

2 x screw connector

Ambient temperature 

- 10° C to + 50° C (operation)

 

- 20° C to + 70° C (storage)

Dimensions 

55 x 90 x 38 mm (width x height x depth)

Visit www.marmitek.com for our complete product range.

1x UM7206

1x User Manual
 English, 

Deutsch

 Français, 

Espanol,

 Italiano, 

Nederlands