Epson 9600 ユーザーズマニュアル

To keep your printer working at its best, you should clean it several times a 
year.

1. Make sure the printer is turned off and all the lights on the control panel 

are off. Then unplug the power cord and disconnect the printer from 
the computer.

2. Open the roll paper cover and remove the roll paper. Remove any sheet 

media from the printer. Then use a soft brush to carefully clean away 
any dust or dirt.

3. Open the lower cover and use a soft brush to carefully clean away any 

dust or dirt inside the cover. 

Some kinds of paper can cause paper dust to accumulate on the paper 
feed roller. Clean the area shown below using canned air.

4. Remove the paper basket. Then clean away any dust or dirt around the 

leg assembly using a soft brush.

5. If the outer case is dirty, clean it with a soft, clean cloth dampened with 

mild detergent. Keep the ink cartridge compartment closed to prevent 
water from getting inside.

6. If the area under the roll paper cover accidentally gets soiled with ink, 

wipe it off with a damp cloth.

7. To wash the paper basket, remove the shafts, then machine wash with 

mild detergent and air dry. 

Be careful not to touch 
the gears inside the 
printer.

To avoid damaging the 
components as well as 
the case, never use 
alcohol or thinners to 
clean the printer. 

Be careful not to get 
water on the printer 
mechanism or electronic 
components.

Don’t use a hard or 
abrasive brush.

Don’t spray the inside 
the printer with 
lubricants; unsuitable 
oils can damage the 
mechanism. Contact your 
dealer or a qualified 
servicer if you think the 
printer needs lubrication.

Clean paper feed roller