Epson 9600 ユーザーズマニュアル

If you are moving the printer a short distance (for example, in the same 
building), you can roll it on its stand (see page 161). To ship the printer a 
longer distance, you should repack it using the original box and packing 
materials. Follow the instructions below to prepare the printer for shipment.

Before shipping the printer or storing it for an extended period (two years for 
the Photographic Dye ink model, or six months for the UltraChrome ink 
model), contact EPSON for assistance (see page 11). Request a Printer 
Transportation Kit (provided on loan at no charge), which you must use to 
flush all the ink from the printer.

Make sure you have the following items on-hand before preparing the 
printer for shipping:

•

original shipping container

•

carriage locking bracket and screw (see page 22 or 33)

•

at least one maintenance tank; you’ll need two if the current tank is 
more than half-used (see page 155)

•

a new set of ink cartridges for setting up the printer when it arrives at its 
destination

If any of these items are missing, contact EPSON for assistance in obtaining 
the necessary parts (see page 11).

Follow the steps below to prepare the printer for shipment. 

1. Contact EPSON, as described on page 11, to obtain a Printer 

Transportation Kit. You must use the kit to drain all the ink from the 
printer before it can be shipped. Instructions are provided with the kit.

2. Once the ink is drained, install a new maintenance tank (see page 155).

3. Turn off the printer and wait until the carriage moves to the home 

position (on the far right) and the 

Operate

 light goes off. Then unplug 

the printer.