Intel R1304BTLSFANR ユーザーズマニュアル
350W Power Subsystem
Intel
®
Server System R1304BTSSFAN/R1304BTLSFAN/R1304BTLSHBN TPS
16
Revision 2.1
Intel order number G17455-005
4. 350W Power Subsystem
The power subsystem of the server systems consists of a single, non-redundant 350-W power
supply with five outputs: 3.3 V, 5 V, 12 V, -12V, and 5 VSB. The form factor fits into a 1U system
and provides a wire harness output to the system. An IEC connector is provided on the external
face for AC input to the power supply. The power supply provides one; non-redundant 40 mm
fan for self-cooling. The power supply fans also provide additional airflow for parts of
the system.
supply with five outputs: 3.3 V, 5 V, 12 V, -12V, and 5 VSB. The form factor fits into a 1U system
and provides a wire harness output to the system. An IEC connector is provided on the external
face for AC input to the power supply. The power supply provides one; non-redundant 40 mm
fan for self-cooling. The power supply fans also provide additional airflow for parts of
the system.
The power supply operates within the following voltage ranges and ratings:
Table 13. Input Voltage Range
Parameter
Min
Rated
Max
Max Input AC Current
Line Voltage (110)
90V
rms
100-127 V
rms
140V
rms
6 A
rms
1
Line Voltage (220)
180V
rms
200-240 V
rms
264V
rms
3 A
rms
2
Frequency
47 Hz
50/60Hz
63 Hz
Notes:
1. Maximum input current at low input voltage range shall be measured at 90Vac, at max. load.
2. Maximum input current at high input voltage range shall be measured at 180VAC, at max. load.
1. Maximum input current at low input voltage range shall be measured at 90Vac, at max. load.
2. Maximum input current at high input voltage range shall be measured at 180VAC, at max. load.
The power supply must operate within all specified limits over the following input voltage ranges
shown in the table. Harmonic distortion of up to 10% Total Harmonic Distortion (THD) must not
cause the power supply to go out of specified limits.
shown in the table. Harmonic distortion of up to 10% Total Harmonic Distortion (THD) must not
cause the power supply to go out of specified limits.
4.1 Mechanical Specifications
The 1U 350 W power supply is designed specifically for use in the Intel
®
Server Systems
R1304BTLSHBN. The physical size of the power supply enclosure is intended to accommodate
power ranges from 350 W. The power supply size is 40 mm x 81.5mm x 150 mm and has a wire
harness for the DC outputs. The AC input plugs directly into the external face of the power
supply; refer to the following figure for more information.
power ranges from 350 W. The power supply size is 40 mm x 81.5mm x 150 mm and has a wire
harness for the DC outputs. The AC input plugs directly into the external face of the power
supply; refer to the following figure for more information.