Dataram 32GB DDR3-1333 PC3L-10600L 240-pin LRDIMM DRL1333LRQ/32GB プリント
製品コード
DRL1333LRQ/32GB
DRL1333LR
DDR3-1333, PC3L-10600L, ECC, 1.35V, 240-pin LRDIMMs
DRL1333LR
12-Jun-12
Copyright
2012 Dataram Corporation | U.S.A. Headquarters +1 609-799-0071 | Offices in Europe and Asia | www.dataram.com
The information contained in this document has been carefully checked and is believed to be reliable and accurate. However, Dataram assumes no responsibility for errors.
Products in Family
DRL1333LRQ/32GB (1 x 32GB 4Rx4 LRDIMM)
Features
Description
240-pin JEDEC-compliant DIMMs
133.35 mm wide by 30 mm high (1.181
133.35 mm wide by 30 mm high (1.181
” x 5.25”)
Data Transfer Rate: 10.6 Gigabytes/sec
Operating Voltage: 1.35V (1.28V~1.45V)
Backward compatible: 1.5V(1.425V~1.575V)
Fully RoHS Compliant
Thermal Sensor
Heat Spreader
Operating Voltage: 1.35V (1.28V~1.45V)
Backward compatible: 1.5V(1.425V~1.575V)
Fully RoHS Compliant
Thermal Sensor
Heat Spreader
The DRL1333LR/32GB upgrade is a load reduced 4Gx72
memory module, which conforms to JEDEC's DDR3,
PC3-10600L standard. The assembly is Quad-Rank. The
ranks are comprised of eighteen 2Gx4 DDP (Dual Die
Pack) DDR3 SDRAMs. One 2K-bit EEPROM is used for
Serial Presence Detect and an Isolation Memory Buffer,
which enables higher system memory bandwidth at
DDR3 speeds up to 1333 MT/s.
memory module, which conforms to JEDEC's DDR3,
PC3-10600L standard. The assembly is Quad-Rank. The
ranks are comprised of eighteen 2Gx4 DDP (Dual Die
Pack) DDR3 SDRAMs. One 2K-bit EEPROM is used for
Serial Presence Detect and an Isolation Memory Buffer,
which enables higher system memory bandwidth at
DDR3 speeds up to 1333 MT/s.
Dataram Product
Dell Product
Product Description
DRL1333LRQ/32GB
TBD
1 x 32GB 4Rx4 PC3L-10600L-9-11-C1
Notes
Tolerances on all dimensions
except where otherwise
indicated are
except where otherwise
indicated are
.13 (.005).
All dimensions are expressed
in millimeters [inches]
in millimeters [inches]