TP-LINK TL-WDR 4300 ユーザーズマニュアル
TL-WDR4300
N750 Wireless Dual Band Gigabit Router
- 60 -
Access Time - During this time the wireless stations could accessing the AP.
Note:
The range of bandwidth for Guest Network is calculated according to the setting of Bandwidth
Control on the page “Bandwidth Control->Control Settings”.
4.8.2
Storage Sharing
Choose menu “
Guest Network → Storage Sharing”, you can configure the Guest Network
Storage Sharing on the page as shown in Figure 4-45. When a share folder is added, you can
view its display name, volume partition, folder path and you can delete the share folder by clicking
the
view its display name, volume partition, folder path and you can delete the share folder by clicking
the
Delete button.
Figure 4-45 Guest Network Storage Sharing
User Name - The user name is guest for Guest Network, which can't be changed.
Password - Enter the password in the Password field. The password must be composed of
alphanumeric symbols not exceeding 15 characters in length.
alphanumeric symbols not exceeding 15 characters in length.
Confirm Password - Re-enter the password here.
Storage Authority - Authority of user: Read Only or Read and Write.
Name - This folder's display name.
Partition - The volume that the folder resides. Volume 1-8 is mapping to USB port 1, Volume
9-16 is mapping to USB port 2.
9-16 is mapping to USB port 2.
Folder - The real full path of the specified folder.
You can edit the share folder by clicking
Edit.
You can delete the share folder by clicking
Delete.
Follow the instructions below to set up your Guest Network Storage Sharing:
1. Plug an external USB hard disk drive or USB flash drive into this Router.
2. Make sure the Service Status on the page “USB Settings -> Storage Sharing” is
1. Plug an external USB hard disk drive or USB flash drive into this Router.
2. Make sure the Service Status on the page “USB Settings -> Storage Sharing” is
Started.
3. Make sure the Access shared storage with password on the page “USB Settings -> Storage