TP-LINK TL-SG3424P ユーザーズマニュアル

 

49

 

You can bind the IP address, MAC address, VLAN and the connected Port number of the Host 

together, which can be the condition for the ARP Inspection to filter the packets. 

The  binding-table user-bind command is used to bind the IP address, MAC 

address, VLAN ID and the Port number together manually.

You can manually 

bind the IP address, MAC address, VLAN ID and the Port number together in 

the condition that you have got the related information of the Hosts in the LAN. 

binding-table user-bind hostname  ip-addr  mac-addr

    vlan  vid    port 

{none | arp-detection} 

 ——The Host Name, which contains 20 characters at most. 

 —— The IP Address of the Host. 

—— The MAC Address of the Host. 

 ——The VLAN ID neened to be bound, ranging from 1 to 4094.   

 —— The number of port connected to the Host. 

{none | arp-detection}——Disable or Enable ARP detection for the entry. 

Global Configuration Mode 

Bind an ACL entry with the IP is 192.168.0.1, MAC is 00:00:00:00:00:01, VLAN 

ID is 2 and the Port number is 5 manually. Andthen enable the entry for the ARP 

detection.: 

host1 192.168.0.1 

00:00:00:00:00:01 vlan 2 port 5 arp-detection