TP-LINK TL-SG3424P ユーザーズマニュアル

 

51

 

Enable the DHCP-snooping function globally: 

 

The dhcp-snooping global command is used to configure the DHCP snooping 

globally. To restore to the default value, please use no dhcp-snooping global 

command.  

[global-rate global-rate] [dec-threshold dec-threshold] 

[dec-rate dec-rate] 

 —— The value to specify the maximum amount of DHCP messages 

that can be forwarded by the switch per second. The excessive massages will 

be discarded. The options are 0/10/20/30/40/50 (packet/second).By default, it is 

0 standing for disable. 

 ——The value to specify the minimum transmission rate of the 

Decline packets to trigger the Decline protection for the specific port.The options 

are 0/5/10/15/20/25/30 (packet/second).By default, it is 0 standing for disable. 

 ——The value to specify the Decline Flow Control. The traffic flow of 

the corresponding port will be limited to be this value if the transmission rate of 

the Decline packets exceeds the Decline Threshold. The options are 

5/10/15/20/25/30 (packet/second). By default, it is 5. 

Global Configuration Mode 

Configure the Global Flow Control as 30pps, the Decline Threshold as 20 pps, 

Decline Flow Control as 20 pps for DHCP Snooping 

global-rate  30 dec-threshold 20 

dec-rate 20