Tripp Lite B125-101-60 ユーザーズマニュアル
TMDS
UP TO 150 ft. (Cat6)
UP TO 100 ft. (Cat5)
LOCAL
TRANSMITTER
BLU-RAY
1080p (6o Hz)
1080p (6o Hz)
REMOTE
RECEIVER
DDC
B125-101-60 Installation Diagram
2
Installation and Operation
Refer to the installation diagrams below as you perform these steps.
Note:
1. Test to make sure the entire installation works properly before pulling cables
1. Test to make sure the entire installation works properly before pulling cables
through ceilings/walls.
2. To achieve maximum distance and performance, 24Awg solid wire Cat5e/6
cable must be used. The use of stranded wire Cat5e/6 cable, or cable with a
gauge size higher than 24Awg will result in shorter extension distance. All
Tripp Lite N202-Series Cat6 cables are made with 24Awg, solid wire cabling.
gauge size higher than 24Awg will result in shorter extension distance. All
Tripp Lite N202-Series Cat6 cables are made with 24Awg, solid wire cabling.
3. Make sure the power to all devices you are connecting to is turned off prior to
installation.
Product Features
• B125-101-60 – Extend a 1080p (60Hz) signal up to 150 ft. using
Cat6 cabling, or up to 100 ft. using Cat5 cabling
• B125-101-60-WP – Extend a 1080p (60Hz) signal up to 125 ft.
using Cat6 cabling, or up to 75 ft. using Cat5 cabling
• Supports up to 7.1 channel surround sound audio
• Built-in Equalization control to adjust the video image
• HDCP and 3D compatible
• Built-in Equalization control to adjust the video image
• HDCP and 3D compatible
Optional Accessories
• N202-Series Cat6 24Awg, solid wire patch cables
• P568-Series High Speed HDMI cables
• P568-Series High Speed HDMI cables
201109193-93-3144.indd 2
10/7/2011 2:29:40 PM